Pioneer DCS-370 Інструкція з експлуатації Посібник з експлуатації - Сторінка 40
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Приймач Pioneer DCS-370. Pioneer DCS-370 48 сторінок. Pioneer dvd receiver operating instructions
Друкувати сторінку
10
Additional information
Televisions also come in different aspect ratios;
'standard' 4:3 and widescreen 16:9.
Set to 4:3 (Letter Box), widescreen
discs are shown with black bars top
and bottom.
Set to 4:3 (Pan&Scan), widescreen
discs are shown with the left and right
sides cropped. Although the picture
looks larger, you don't actually see
the whole picture.
TV system setting
The default setting of this system is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO. If you find picture distortion with
some discs, set the TV system to match your
country or region's system. However, this may
restrict the kinds of disc you can watch. See
the table for the kinds of discs compatible with
each setting (AUTO, PAL and NTSC).
1
Switch the unit into standby, then press
SETUP.
Use / to choose TV SYS then press
2
ENTER.
The TV system changes as follows:
• AUTO NTSC
• NTSC PAL
• PAL AUTO
Note
1 • Using the 16:9 (Wide) setting with a standard 4:3 TV, or one of the 4:3 settings with a widescreen TV, will result in distortion.
• When you watch discs recorded in 4:3 format, you can use the TV controls to select how the picture is presented. Your TV
may offer various zoom and stretch options; see the instructions that came with your TV for details.
• Some movie aspect ratios are wider than 16:9, so even with a widescreen TV, these discs will still play in a 'letterbox' style.
2 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without
color. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV
has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands
at the top and bottom of the screen.
3 You have to switch the player into standby (press STANDBY/ON) before each change.
40
En
The system automatically switches on and
1
you'll see the new TV system setting in the
display after seeing WELCOME.
Media Type
DVD/Super VCD/
Video CD/DivX
Video
CD/MP3/WMA/
MPEG-4 AAC/
JPEG/no disc
Switching off the demo
Follow the steps below to switch the automatic
demo feature off (this starts when you plug in
for the first time):
1
With the unit in standby, press SETUP.
Use / to choose DEMO then press
2
ENTER.
Use / to select DEMO OFF and press
3
2
ENTER.
Dimming the Display
You can adjust the brightness of the text in the
front panel display. When the display is set to a
darker color, the Power Indicator is turned off.
Press SETUP and use / to choose
1
DIMMER then press ENTER.
This is shown in the front panel display.
Use / to select LIGHT or DARK then
2
press ENTER.
3
Player setting
Format NTSC
PAL
AUTO
NTSC
NTSC
PAL
NTSC
PAL
NTSC
PAL
PAL
—
NTSC
PAL
NTSC or
PAL