Pioneer dvh-885avbt Посібник користувача - Сторінка 22
Переглянути онлайн або завантажити pdf Посібник користувача для Приймач Pioneer dvh-885avbt. Pioneer dvh-885avbt 40 сторінок.
Друкувати сторінку
Section
03
Operating this unit
Audio Setting
Audio Setting
POWERFUL
+6
Press the [SEL] button to enter audio
setting menu. First press shows current EQ.
Press [ ] (Up) / [ ] (Down) button on the
front panel or [
remote control to changes EQ in this order:
POWERFUL -> NATURAL -> VOCAL
-> CUSTOM -> FLAT->SUPERBASS
To set user definition, press [SEL] button or
[
] (Left) / [
panel or [
control to select it including: BAS(bass)/
MID(middle)/TRE(treble)/BAL(balance)/
FAD(fader), press [
remote control to adjust value.
Video Setting
Video Setting
BRI
At Audio setting menu, press [
[
] (Right) or [
repeatedly until Video Setting menu
displayed.
Press [
] (Left) / [
button to select it including: BRI/CON/SAT,
press [ ] (Up) / [ ] (Down) or [
button to adjust value.
* Rear monitor is not adjustable.
Note
Video setting is adjustable for this product display
only, it is not adjustable when video output to the
other devices display.
22
En
+4
] / [
] button on the
] (Right) button on the front
] / [
] button on the remote
] / [
] button on the
CON
SAT
] (Left) /
] / [
] button
] (Right) or [
Other Function
Using an AUX source
A separately sold auxiliary device such as a
VCR or portable device can be connected
to this unit.
When connecting auxiliary device using the
front AUX input.
• You need to activate the AUX function in
the initial setting menu. Refer to previous
page.
• A portable audio/video player can be
connected by using a 3.5mm plug
( 4 p o l e ) w i t h a n R C A c a b l e ( s o l d
separately). However, depending on the
cable, a reverse connection between the
red (right side audio) cable and yellow
(video) cable may be required in order
for the sound and video image to be
reproduced correctly.
Using an AV source
When connecting auxiliary device using the
rear AV input.
• You need to activate the AV function in
the initial setting menu. Refer to previous
page.
• A portable audio/video player can be
connected by using a standard plug
with an RCA cable (sold separately).
However, depending on the cable, a
reverse connection between the red/
white (right/left side audio) cable and
yellow (video) cable may be required in
order for the sound and video image to
be reproduced correctly.
] / [
]
] / [
]