Pioneer Elite SC-85 Інструкція з експлуатації
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Приймач Pioneer Elite SC-85. Pioneer Elite SC-85 8 сторінок. Dolby atmos-enabled speakers setup
Також для Pioneer Elite SC-85: Довідковий посібник (45 сторінок)
Друкувати сторінку
Dolby Atmos-enabled Speakers Setup Instructions for
Use this procedure to setup Dolby Atmos-enabled Speakers and update the A/V receiver's firmware using a
USB storage device. If you have any difficulty carrying out these instructions, please call Pioneer's Customer
Support Center toll free in the USA at 1-844-679-5350 for assistance.
The first step is to confirm the AVR's firmware version is 1-290-008-518-121 or newer.
The buttons and connector mentioned in the following procedures are located on the Remote Control or the
AVR's Front Panel as shown in Figure 1.
Check the Firmware Version
1. Turn on the receiver by pressing the
STANDBY/ON
button.
2. If using the Remote, press the MAIN button.
3. Press the HOME MENU button and using the
or
button, Select "4. System Setup" and
press the ENTER button.
4. Using the
or
button, Select "g. Other Setup"
and press the ENTER button.
Elite Models SC-85, SC-87, and SC-89
AVR Front Panel
1
Remote
Figure 1