Pioneer VSX-C502-S Інструкція з експлуатації - Сторінка 23

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Приймач Pioneer VSX-C502-S. Pioneer VSX-C502-S 49 сторінок. Audio/video multi-channel receiver

Друкувати сторінку

Controls and displays

SURROUND (page 27)

Use to select a SURROUND mode for the current

source.

ADVANCED SURROUND (page 28)

Use to select an ADVANCED SURROUND mode for

the current source.

SOUND MODE (page 28)

Use to select a SOUND MODE for the current

source.

DIALOG (page 28)

Press to switch on/off DIALOG (dialog

enhancement).

10 MUTE

Press to mute all output. Press again (or adjust the

volume using the MASTER VOLUME control) to restore

the sound.

11 SBch MODE (page 29)

Use to select the surround back channel mode and

virtual surround back options.

12 MASTER VOLUME

Use to adjust the volume.

13 MCACC SETUP (page 24)

Press to start MCACC (Multichannel Acoustic

Calibration) setup.

14 SYSTEM SETUP (page 34)

Press to access the SYSTEM SETUP menu to make

detailed receiver settings.

15 Cursor keys and ENTER

Use to navigate menus and select options/execute

commands.

16 CH SELECT (page 37)

First press RECEIVER, then press CH SELECT repeatedly

to select a speaker channel to adjust.

17 TEST TONE (page 37)

First press RECEIVER, then press TEST TONE to start/

stop the test tone.

18 Playback controls (page 40)

Playback controls for external components, such as DVD

and CD players.

Functions printed in blue control the built-in tuner; other

functions control other external equipment.

19 Number buttons (page 40)

Use for numerical input of track numbers, radio

frequencies, and so on.

20 CHANNEL +/– (page 40)

Use to change channels on a satellite receiver, cable box,

VCR or DVR.

21 DIMMER

First press RECEIVER, then press DIMMER repeatedly to

change the brightness/switch off the front panel display.

The display will light brightly for about two seconds when

you operate the receiver with the display off or dimmed.

(Note that the master volume indicator always remains

lit, even when the rest of the display is off.)

22 TV CONTROL buttons (page 38)

Use to control your TV (after setting up the remote control

to work with your TV).

23 SLEEP (page 32)

First press RECEIVER, then press SLEEP repeatedly to put

the receiver into sleep mode and select the length of time

before the receiver turns off.

Operating range of the remote control

The remote control may not work properly if:

• There are obstacles between the remote control and

the receiver's remote sensor.

• Direct sunlight or fluorescent light is shining onto the

remote sensor.

• The receiver is located near a device that is emitting

infrared rays.

• The receiver is operated simultaneously with another

infrared remote control unit.