Pioneer VSX-S300-k Інструкція з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Приймач Pioneer VSX-S300-k. Pioneer VSX-S300-k 36 сторінок. Audio/video multi-channel receiver
Також для Pioneer VSX-S300-k: Посібник із швидкого старту (33 сторінок)
Друкувати сторінку
Connecting your equipment
Chapter 2:
Connecting your
equipment
Determining the speakers' application
By connecting the left and right front speakers (L/R), the
center speaker (C), the left and right surround speakers (SL/
SR), the left and right surround back speakers (SBL/SBR) (or
the left and right front height speakers (FHL/FHR)), and the
subwoofer (SW), a surround sound system up to 7.1 channel
can be enjoyed.
The 5.1 channel surround system is the most commonly-
used in home theaters. To achieve the best possible surround
sound, install your speakers as shown below.
5.1 channel surround
6.1 channel surround
system:
(Surround back) system:
R
L
L
SW
C
C
SR
SL
7.1 channel surround
7.1 channel surround
(Surround back) system:
(Front height) system:
R
FHL
L
L
SR
SW
C
C
SL
SBR
SBL
Important
• To connect the surround back or front height
speakers, an additional amplifier is required. Connect
the additional amplifier to the PRE OUT SURR BACK/
FRONT HEIGHT outputs of this unit and connect the
surround back or front height speakers to the additional
amplifier (see Connect the surround back or front height
speakers on page 11).
Another way, you can use the speakers connected to the B
speaker terminals to listen to stereo playback in another
room. See Switching the speaker terminal on page 11 for the
listening options with this setup.
• You will not be able to connect the B speakers if you
connect the surround speakers in the main zone.
When using the B speakers, main zone sound will only be
output from the front speakers, the center speaker and
the subwoofer. (No sound is output from the surround
and surround back speakers.)
• Speaker B does not allow for subwoofer connection.
Please use full-range speakers.
R
SW
SR
SB
SL
L
FHR
R
Some tips for improving sound quality
Important
SW
• Speakers such as S-HV500-LR and S-HV600B may have
specific installation methods. For more details, refer to
SR
the operating instructions supplied with speaker.
SL
R
Main zone
Speaker B
Where you put your speakers in the room has a big effect on
the quality of the sound. The following guidelines should help
you to get the best sound from your system.
• It is best to angle the speakers towards the listening
position. The angle depends on the size of the room. Use
less of an angle for bigger rooms.
• Refer to the chart below for placement of speakers you
intend to connect.
SW
FHL
FHR
C
L
R
30 30
120
120
SL
60
SBL
SB
SBR
Place the surround speakers at 120º from the center. If
-
you, (1) use the surround back speaker, and, (2) don't
use the front height speakers, we recommend placing
the surround speaker right beside you.
If you intend to connect only one surround back
-
speakers, place it directly behind you.
-
If the surround speakers cannot be set directly to the
side of the listening position with a 7.1-channel system,
the surround effect can be enhanced by turning off the
Up Mix function (see Setting the Up Mix function on
page 24).
• For the best stereo effect, place the front speakers 2 m to
3 m apart, at equal distance from the TV.
• If you're using a center speaker, place the front speakers
at a wider angle. If not, place them at a narrower angle.
• Place the center speaker above or below the TV so that the
sound of the center channel is localized at the TV screen.
Also, make sure the center speaker does not cross the
line formed by the leading edge of the front left and right
speakers.
02
02
SR
9
En