Pioneer XV-DV360 Інструкція з експлуатації Посібник з експлуатації - Сторінка 39
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Приймач Pioneer XV-DV360. Pioneer XV-DV360 48 сторінок. 5.1 home theater system with usb* connection for jpeg “slideshow with music”
Також для Pioneer XV-DV360: Технічні характеристики (2 сторінок), Налаштування (2 сторінок)
Друкувати сторінку
Additional information
Set to 4:3 (Pan&Scan), widescreen
discs are shown with the left and right
sides cropped. Although the picture
looks larger, you don't actually see
the whole picture.
TV system setting
The default setting of this system is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO. If you find picture distortion with
some discs, set the TV system to match your
country or region's system. However, this may
restrict the kinds of disc you can watch. See
the table for the kinds of discs compatible with
each setting (AUTO, PAL and NTSC).
1
Switch the unit into standby, then press
SETUP .
2
Use
to choose TV SYS then press
ENTER .
The TV system changes as follows:
• AUTO
NTSC
• NTSC
PAL
• PAL
AUTO
The system automatically switches on and
you'll see the new TV system setting in the
display after seeing WELCOME.
Media Type
Format NTSC
DVD/Super VCD/
NTSC
Video CD/DivX
PAL
Video
Note
3 • Using the 16:9 (Wide) setting with a standard 4:3 TV, or one of the 4:3 settings with a widescreen TV, will result in distortion.
• When you watch discs recorded in 4:3 format, you can use the TV controls to select how the picture is presented. Your TV
may offer various zoom and stretch options; see the instructions that came with your TV for details.
• Some movie aspect ratios are wider than 16:9, so even with a widescreen TV, these discs will still play in a 'letterbox' style.
1 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without col-
or. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV has
a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at
the top and bottom of the screen.
2 You have to switch the player into standby (press
1
2
Player setting
PAL
AUTO
NTSC
PAL
NTSC
NTSC
PAL
PAL
STANDBY/ON) before each change.
Media Type
Format NTSC
CD/MP3/WMA/
—
MPEG-4 AAC/
JPEG/no disc
Frequency step setting
Australian model only
If you find that you can't tune into stations
successfully, the frequency step may not be
suitable for your country/region.
1
Switch the unit into standby, then press
SETUP .
2
Use
to choose AM 9K/10K then
press ENTER .
3
Use
to select AM 9K or AM 10K then
press ENTER .
Switching off the demo
Follow the steps below to switch the automatic
demo feature off (this starts when you plug in
for the first time):
1
With the unit in standby, press SETUP .
2
Use
to choose DEMO then press
ENTER .
3
Use
to select DEMO OFF and press
ENTER .
Player setting
PAL
AUTO
NTSC
PAL
NTSC or
PAL
10
39
En