Pioneer XV-HTD510 Інструкція з експлуатації Посібник з експлуатації - Сторінка 22
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Приймач Pioneer XV-HTD510. Pioneer XV-HTD510 48 сторінок. Dvd receiver/speaker system
Також для Pioneer XV-HTD510: Інструкція з експлуатації Посібник з експлуатації (48 сторінок)
Друкувати сторінку•
To change the frequency one step at a time, press the
1 / ¡ buttons. When you locate a station signal,
the
(tuned) indicator lights in the display.
•
Press and hold the 1 or ¡ button for high speed
tuning, releasing the button once you reach the
frequency you want. When you stop on a station signal,
the
(tuned) indicator lights in the display.
If you're listening to a stereo FM broadcast, but find that
there is a lot of noise because of a weak signal, try
switching to mono.
When listening in mono, the
display.
If you often listen to a particular radio station, it's
convenient to have the receiver store the frequency for
easy recall whenever you want to listen to that station.
This saves the effort of manually tuning in each time.
This system can save up to 30 station presets. When
saving FM frequencies, the receiver also saves the mono
setting (see Improving FM stereo sound above).
See Listening to the radio on page 21 for more on how
to do this.
2
3
indicator lights in the
2
3
Alternatively, use the number buttons (use the
button for numbers over 10).
If you use the number buttons, you can skip step 6.
Repeat these steps to save up to 30 station presets.
Having saved up to 30 station presets, you can be
listening to a station with a couple of button presses.
If you're using the front panel controls, press
repeatedly to select the preset station mode.
4
¢
Alternatively, use the number buttons (use the
button for numbers over 10).
• If the system is left disconnected from the AC power
outlet for a lengthy period, the station presets will be lost
and will have to be reprogrammed.
You may have connected your TV, VCR, or other
components to play through this system. Use the
button to select your external equipment as the
source.
Press repeatedly to switch between:
•
inputs
•
input
•
analog inputs