Pioneer AVH-P3150DVD Посібник з монтажу - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з монтажу для Стерео приймач Pioneer AVH-P3150DVD. Pioneer AVH-P3150DVD 40 сторінок. Dvd av receiver

Connecting the units

Fuse resistor

Violet/white

Of the two lead wires connected to the back lamp, connect the one

in which the voltage changes when the gear shift is in the

REVERSE (R) position. This connection enables the unit to

sense whether the car is moving forwards or backwards.

Yellow/black

If you use equipment with Mute function, wire this lead to the

Audio Mute lead on that piece of equipment. If not, keep the

Audio Mute lead free of any connections.

Connection method

1. Clamp the lead.

Note:

· The position of the parking brake switch depends on the vehicle model. For details,

consult the vehicle Owner's Manual or dealer.

Light green

Used to detect the ON/OFF status of the parking

brake. This lead must be connected to the power

supply side of the parking brake switch.

Blue/white

Connect to system control terminal of the power amp or

auto-antenna relay control terminal (max. 300 mA 12 V DC).

With a 2 speaker system, do not connect anything to the speaker leads

that are not connected to speakers.

When you connect the separately sold

multi-channel processor (DEQ-P7650) to this

unit, do not connect anything to the speaker

leads and system remote control (blue/white).

2. Clamp firmly with

needle-nosed pliers.

Power supply side

Ground side

Note:

· Change the initial setting of this unit (refer

to the Operation Manual). The subwoofer

output of this unit is monaural.

<CRD4373-A> <7>

Parking brake

switch