Ariston A1237 Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пральна машина Ariston A1237. Ariston A1237 12 сторінок. Ariston instruction manual washing maching a1637,a1437,a1237

Друкувати сторінку

Personalisation

Setting the temperature

Turn the TEMPERATURE knob to set the wash

temperature (see Programmes Table).

The temperature can be lowered, or even set to cold

wash (

Setting the spin speed

Turn the SPIN SPEED knob to set the spin speed for

the programme selected.

The maximum spin speeds for each programme are

as follows:

Programmes

Cotton

Synthetics

Wool

Silk

Function table

Option

Effect

Delays the start

of the wash by

up to 9 hours.

Delay Timer

Allows for an

impeccable

wash, visibly

whiter than a

Super Wash

standard

Class A wash.

This option

reduces the

amount of

Easy Iron

creasing on

fabrics, making

them easy to iron.

Cuts the duration

of the wash cycle

by 30%.

Rapid

Adds one extra

rinse cycle.

Extra Rinse

Maximum spin speed

1600rpm - Model A1637

1400rpm - Model A1437

1200rpm - Model A1237

800rpm

600rpm

Comments

Press the button repeatedly until the LED corresponding to the

desired delay is turned on.

The fifth time the button is pressed, the function will be disabled.

N.B. Once you have pressed the START/RESET button, the

delay can only be decreased if you wish to modify it.

This function is incompatible with the RAPID function.

When this function is set, programmes 6, 7, 8, 11 and Delicate

rinse will end with the laundry left to soak (Anti-crease) and the

Rinse cycle phase LED

- to conclude the cycle, press the START/RESET button.

- to run the draining cycle alone, set the knob to the relative

symbol

and press the START/RESET button.

This function is incompatible with the SUPER WASH

function.

Remember - you will use more water than with a standard

cycle.

The spin speed can be lowered, or the spin cycle can

be excluded altogether by selecting symbol

The washing machine will automatically prevent you

from selecting a spin speed higher than the maximum

speed for each programme.

Functions

To enable a function:

1. press the button corresponding to the desired

function, according to the table below.

2. the function is selected when the corresponding

LED is illuminated.

! The rapid flashing of the LED indicates that the

corresponding function cannot be selected for the

programme set.

will flash.

Available with

programmes

All

1,2,3,5,6,7,8.

All

programmes

except for

1,2,4,9,10 and

Draining

1,2,3,5,6,7,8.

1,2,3,4,5,6,7,8.

(Model A1237

only)