Pioneer VSX-532 Інструкція з експлуатації Посібник з експлуатації - Сторінка 31
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Стерео приймач Pioneer VSX-532. Pioneer VSX-532 39 сторінок.
Друкувати сторінку
6
6
Speaker Distance
For good sound depth from your system, you need to specify
the distance of your speakers from the listening position. The
receiver can then add the proper delay needed for effective
surround sound.
•
For the assignment of the digital signal inputs, see
Selecting the audio input signal on page
1
Select 'Manual SP Setup' from the Home Menu.
2
Select 'Speaker Distance' from the Manual SP Setup
menu.
2.Manual SP Setup
2d.Speaker Distance
a.Speaker Setting
Front L
b.X.Over
Center
Front R
c.Channel Level
d.Speaker Distance
Surround R
Surround L
Subwoofer
Return
3
Adjust the distance of each speaker using /.
You can adjust the distance of each speaker in 0.1 feet
increments.
4
When you're finished, press RETURN.
You return to the Manual SP Setup menu.
The Input Assign menu
(CD) audio input terminal is assigned to CD under factory
settings, but this can be changed to TV input.
1
Select 'Input Assign' from the Home Menu.
18.
2
Select 'Analog Input' from the Input Assign menu.
3.Input Assign
a.Analog Input
10.0 ft
[
10.0 ft
]
[
10.0 ft
]
[
10.0 ft
]
[
10.0 ft
]
[
10.0 ft
]
Return
3
Select the desired input option for the (CD) audio input
terminal.
4
When you're finished, press RETURN.
You return to the Input Assign menu.
Home Menu
1.Full Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
R et u rn
3a.Analog Input
Analog
CD
Return
Return
31
The Auto Power Down menu
Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours).
•
Default setting: OFF
1
Select 'Auto Power Down' from the Home Menu.
Home Menu
4.Auto Power Down
1.Full Auto MCACC
Auto Power Down
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
R e tur n
2
Specify the amount of time to allow before the power is
turned off (when there has been no operation).
•
You can select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3
When you're finished, press RETURN.
You return to the Home Menu.
Home Menu
2
4
33
OFF
Return