Pioneer VSX-605S Інструкція з експлуатації Посібник з експлуатації - Сторінка 27
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Стерео приймач Pioneer VSX-605S. Pioneer VSX-605S 37 сторінок. Audio/video stereo receiver
Також для Pioneer VSX-605S: Інструкція з експлуатації Посібник з експлуатації (37 сторінок)
Друкувати сторінку
intelligent
OPERATING OTHER COMPONENTS (GUI OPERATION}
[ S C System Control
«Title list by disc number>
DISC TITLE
:Press to register disc titles.
LIST SELECT
:Each press sets "Title list by disc number" or "Title
list by alphabetical order".
4,¥
:Changes the disc number list page.
I/t
:Using the REMOTE SET UP learning function (P. 31),
use memorize commands.
MODE
— -Use this button to switch between SINGLE and ALL
modes when using a file-type CD player.
To play only a single disc select SINGLE.
For search and continuous play of all discs select ALL.
+
:Use to select a disc number.
~
:Use to select a disc of the file-type CD player.
DISC
'Before selecting a disc number button, select this
button first.
TRACK _ :Before selecting a track number button, selact this
button first.
0~9
:For direct selection of a track or programming of tracks.
Use when selecting a disc number as well.
+10
:Use when selecting a track number higher than 10.
For example, to select 21, press the +10 button twice
and then the 1 button.
Use when selecting a disc number as well,
This button cannot be used with some CD players.
® Up to 16 characters can be input.
English characters: A-Z
Numerals: 1-9, 0
Symbols: ?, +, ~,',/, 1,&, Us (space) (8 characters)
Move the cursor to the DISC TITLE button.
Press the ENTER () button.
Move the cursor to the A or ¥ buttons on the display.
Press the ENTER (>) button and select the desired disc
number list page.
Each time the button is pressed, the disc number list page
changes as follows by 10 pages.
fase 1-10 =» 17-20
Puna
81-90 + 91-1004
5.
Moves the cursor to the desired disc number using the
& or ¥ buttons of the remote contro! unit.
6. Press the ENTER (>) button. The selected disc number
lights up at one line, and the first character is highlighted,
indicating standby for input.
7. Select the desired character using the « or ¥ button of
the remote control unit.
8. Move the digit using the » button of the remote control
unit.
®
Corrections can be made by moving back to the previous
digit using the <4 button.
93. Repeat steps 7 to 8, and select the other digit characters.
10. Press the ENTER (» } button. The title of the selected disc
number is registered.
11. Repeat steps 5 to 10 for the number of times desired,
and input the title of other discs.
12. Move the cursor to the DISC TITLE button.
13. Press the ENTER (>) button.
NOTES:
@ You can use Multi-jog, SELECT {4}, MEMORY () and ENTER
buttons on the front panel for this operation.
@ if you input the initial letter of an artist in advance, it will be
easy to find an artist and all because the list is shawn according
to the initial letter in the "Title list by alphabetical ordar".
@ if you use the Pioneer file type CD player, it starts to playback
only by pressing the desired DiSC number.
ar
<ARB7089>