Pioneer VSX-605S Інструкція з експлуатації Посібник з експлуатації - Сторінка 31
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Стерео приймач Pioneer VSX-605S. Pioneer VSX-605S 37 сторінок. Audio/video stereo receiver
Також для Pioneer VSX-605S: Інструкція з експлуатації Посібник з експлуатації (37 сторінок)
Друкувати сторінку
intelligent
REMOTE SET UP (GUI OPERATION)
L S C System Control
%
&
&
2
S|FISHER
|
2
=
| MAGNABOX 1 | 2
™
SN LMAGNABOX 2 |"
YTV
a
T Car
RCA
MiTSUBISH! | [PIONEER
"SHARP
GOLD STAR
JEBROLD 1
2 SONY
8|MAGNABOX | 8| JERROLD 3
Fos TOSHIBA
BL
| JERROLD 4
THITACHE
|
PISAL
PHILIPS
|
[SA2__
PANASONIC
| |
[ZENITH
This function enables components of brands and functions not
same signals.
press.
The "STANDBY"
indication flashes. (If you remain in
STANDBY for about 1 minutes, it is canceled.)
(Example: Using the 0 buttons for learning)
3. Point your component's remote controbat this unit's
remote control unit's sensor window and press the
selected button.
Press, holding the remote central unit
within 50 cm (20 inches) of this unit's
sensor window.
® If "OK" is displayed, learning has been completed. If you
want to use another button for learning, repeat steps 2
and 3.
® If "NG" is displayed, repeat steps 2 and 3.
® When you have completed learning, press the EXIT button.
NOTE:
® To return buttons you used for learning to their original
settings, press the CLEAR button. This returns them to the
original Pioneer remote control commands,
® There are no signals in buttons I and If so yeu can use them
for learning.
® Even when OK is indicated during learning, operation may still
not be possible. ff this happens, repeat the learning procedure.
With some manufacturer's components, learning may be
difficult to perform. Learning may also not be possible if the
remote control's batteries are run down. If this is the case, load
the remote control with new batteries and repeat the learning
procedure.
® Even black preset buttons can be used for learning other
commands.
@ Learning a command may not be possible if many commands
requiring a large amount of memory have already been learned
resulting in insufficient memory remaining.
31
<ARBIO59>