Pioneer A-502R Інструкція з експлуатації Посібник з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Підсилювач Pioneer A-502R. Pioneer A-502R 13 сторінок.
Друкувати сторінку
PANEL FACILITIES
[FRONT PANEL]
®
(i) PIONEER
SYZREO
AMPLE
A-S5O2R
® ® @
@
®
@ POWER STANDBY/ON switch/indicator
This is the switch for electric power.
ON:
When set to the ON position, power is supplied and the
unit becomes operational.
STANDBY:
When set to the STANDBY position, the main power
flow is cut and the unit is no longer fully operational. A
minute flow of power feeds the unit to maintain
operation readiness.
When the STANDBY
indicator lights, the unit is in
STANDBY.
@ Remote control sensor window
® DIRECT button/indicator
Use this button/indicator when you do not wish to pass the output
from
input terminal
equipment
through
the various
frequency
adjusting circuits (BASS, TREBLE,
BALANCE,
LOUDNESS)
and
adaptor terminals (ADAPTOR).
On: The indicator lights: The signals input through the input
terminals are reproduced without passing through the various
frequency adjusting circuits. This results in flat, pure sound
_
which is a more faithful reproduction of the input source.
Off: The indicator goes out: The signal passes through the various
frequency adjusting circuits.
@) @)
TAPES
TAPE
t/OAT
)
@ Input selector buttons/indicators
Use to select the playback source.
LINE:
For playback with
a component connected to Line
terminal.
TUNER:
For AM or FM broadcast reception with a tuner.
PHONO:
For record playback with a turntable.
CD:
For compact disc playback with a CD player.
TAPE 1/DAT: For playback with a cassette deck or digital audio
cassette deck connected to TAPE 1/DAT terminals.
TAPE 2:
For playback with a cassette deck connected to TAPE 2
terminals.
NOTE:
Circuit switching is performed by motor-driven rotary switches.
Therefore, there is a slight time lag between pressing of the button
and switching.
© VOLUME control
Use to adjust the volume level.
NOTE:
This unit is equipped with a circuit that attenuates LOUDNESS and
TONE effects as volume is turned up.
@® MUTING button/indicator
Use to temporarily lower sound volume.
On: The indicator lights.
The sound volume is lowered to one-hundredth (—20 dB).
Off: The indicator goes off.
The sound will return to its previous volume.
3
<ARB1422>