Ariston ARTXD 109 Інструкція з використання Посібник з використання - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з використання Посібник з використання для Пральна машина Ariston ARTXD 109. Ariston ARTXD 109 24 сторінки.

Друкувати сторінку

Ariston ARTXD 109 Інструкція з використання Посібник з використання

Running a wash cycle

1. SWITCH THE MACHINE ON. Press the

the text WELCOME will appear on the display and the

START/PAUSE indicator light will flash slowly in a green

colour.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed

the maximum load value indicated in the table of

programmes on the following page.

3. MEASURE OUT THE DETERGENT. Pour the

detergent into the relevant compartments as described

in "Detergents and laundry".

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Press one of the WASH

CYCLE SELECTOR buttons to select the required wash

cycle; the name of the wash cycle will appear on the

display. A temperature and spin speed is set for each

wash cycle; these may be adjusted. The duration of the

cycle will appear on the display.

6. CUSTOMISE THE WASH CYCLE. Use the relevant

buttons:

Modifying the temperature and/or spin

speed. The machine automatically selects the

maximum temperature and spin speed set for the

selected wash cycle; these values cannot therefore

be increased. The temperature can be decreased by

pressing the

setting is reached. The spin speed may be progressively

reduced by pressing the

excluded (the "OFF" setting). If these buttons are

pressed again, the maximum values are restored.

Setting a delayed start.

To set a delayed start for the selected programme,

press the corresponding button repeatedly until the

required delay period has been reached. When this

option is enabled, the

display. To remove the delayed start function press the

button until the text "OFF" appears on the display.

• Press the button to enable the function; the indicator

light corresponding to the button will switch on.

• Press the button again to disable the function; the

indicator light will switch off.

If the selected function is not compatible with the

programmed wash cycle, the indicator light will flash

and the function will not be activated.

button, until the cold wash "OFF"

button, until it is completely

symbol lights up on the

Modifying the cycle settings.

button;

If the selected function is not compatible with

another function which has been selected previously,

the indicator light corresponding to the first function

selected will flash and only the second function will

be activated; the indicator light corresponding to the

enabled function will remain lit.

The functions may affect the recommended load value

and/or the duration of the cycle.

7. START THE PROGRAMME. Press the START/

PAUSE button. The corresponding indicator light will

become green, remaining lit in a fixed manner, and the

door will be locked (the DOOR LOCKED

be on). During the wash cycle, the name of the phase

in progress will appear on the display. To change a

wash cycle while it is in progress, pause the washing

machine using the START/PAUSE button (the START/

PAUSE indicator light will flash slowly in an orange

colour); then select the desired cycle and press the

START/PAUSE button again.

To open the door while a cycle is in progress, press

the START/PAUSE button; if the DOOR LOCKED

symbol is switched off the door may be opened. Press

the START/PAUSE button again to restart the wash

cycle from the point at which it was interrupted.

8. THE END OF THE WASH CYCLE. This will be

indicated by the text "END OF CYCLE" on the display;

when the DOOR LOCKED

the door may be opened. Open the door, unload the

laundry and switch off the machine.

If you wish to cancel a cycle which has already begun,

press and hold the

and the machine will switch off.

Load balancing system

Before every spin cycle, to avoid excessive vibrations and

to distribute the load in a uniform manner, the drum rotates

continuously at a speed which is slightly greater than the

washing rotation speed. If, after several attempts, the load is

not balanced correctly, the machine spins at a reduced spin

speed. If the load is excessively unbalanced, the washing ma-

chine performs the distribution process instead of spinning.

To encourage improved load distribution and balance, we

recommend small and large garments are mixed in the load.

symbol will

symbol switches off

button. The cycle will be stopped