Pioneer ODR PREMIER RS-A1 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Pioneer ODR PREMIER RS-A1. Pioneer ODR PREMIER RS-A1 26 сторінок. Digital “pure class a” integrated amplifier

Друкувати сторінку

| Connecting the Cnits

AN CAUTION

To prevent short-circuit

+ Secure the wiring with cable clamps or adhe-

sive tape. To protect the wiring, wrap adhe-

sive tape around them where they lie against

metal parts.

Do not route wires where they will get hot,

for example where the heater will blow over

them. If the insulation heats up, it may

become damaged, resulting in a short-circuit

through the vehicle body.

Make sure that wires will not foul moving

parts of the vehicle, such as the gearshift,

handbrake or seat sliding mechanism.

AN CAUTION

To avoid accidents

+ Do not shorten any leads. Otherwise the

protection circuit may fail to work when it

should.

+ Never feed power to other equipment by

cutting the insulation of the power supply

lead to tap from the lead. The current capaci-

ty of the lead will be exceeded, causing over-

heating.

Be sure to use the special red battery lead

supplied with the amplifier and connect

directly to the battery. Use the supplied

black ground lead and connect to the vehicle

body. (The supplied special red battery and

ground leads are designed so that the ampli-

fier can be connected safely.)

To prevent overload to the battery

* The power consumption of the RS-A1 is very

high. To avoid overload to the battery, do

not connect more than two RS-A1 amplifiers

to an ODR System.