Pioneer SA-5800 Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Підсилювач Pioneer SA-5800. Pioneer SA-5800 22 сторінки.
Друкувати сторінку
© VOLUME CONTROL
Use this control to adjust the output level to the
speakers
and
headphones.
Turn
it clockwise to
increase the output level. No sound will be heard
if you set it to "0".
@ HEADPHONE JACK
Plug the headphones
into this jack when
you
want to listen through your stereo headphones.
NOTE:
Set the speaker selector to OFF when listening only with
headphones.
Use
these
controls
to adjust the bass and
the
treble. If you turn the bass control to the right
from
its center
position,
you
will
be
able to
emphasize the sound in the low-frequency range.
Conversely,
turning
this
control
left from
the
center position, you will attenuate the sound.
You
can
use the treble
control
to adjust the
sound in the high-frequency range.
@ BALANCE CONTROL
Use this control to balance the volume of the left
and right channels.
If the sound appears to be
louder on the right, it means that the volume of
the right channel
is higher.
Turn
the balance
contro! to the left and adjust.
Conversely, if the sound appears to be louder on
the
left, it means
that the volume
of the left
channel
is higher.
Therefore,
turn the balance
control to the right and adjust.
SUBSONIC FILTER SWITCH
When this switch is set to the 15Hz position, the
subsonic filter with a cut-off frequency of 15Hz is
actuated.
The subsonic filter serves to attenuate
frequencies lower than 15Hz in a 6dB/oct slope.
It is therefore effective in suppressing ultra-low-
frequency
noise
which
is generated
by record
warp and other causes. You cannot actually hear
this noise but it is a factor in the generation of
intermodulation
distortion
and
it may
damage
your speaker system. Set this switch to the 15Hz
position during record play for the best effect.
SA-5800
d) FUNCTION SELECTOR
Use
this selector
to select
the program
source.
When set, the function indicator above the meter
panel corresponding to the position of the func-
tion selector will light up.
TUNER:
Set here when
listening to broadcasts
on a tuner connected to the TUNER jacks.
(The TUNER
function indicator lights up.)
PHONO:
Set here when
playing records on a
turntable connected
to the PHONO
jacks.
(The PHONO
function indicator lights up.)
AUX:
Set
here
when
listening
to a program
source
which
is connected
to the
AUX
jacks.
(The AUX function indicator lights up.)
42 TAPE MONITOR
SWITCHES (1, 2)
Use these switches to monitor recording or a tape
being played back on a tape deck.
1:
Set
this
switch
to
ON
when
you
want
to
monitor
a recording
or a tape being played
back on a tape deck which is connected to the
TAPE 1 jacks.
2:
Set
this switch
to
ON
when
you
want
to
monitor a recording or a tape being played
back on a tape deck which is connected to the
TAPE 2 jacks.
NOTE:
Set these switches
to the upper (OFF) position when
playing records or listening to broadcasts.