Pioneer SA-9800 Інструкція з експлуатації Посібник з експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Підсилювач Pioneer SA-9800. Pioneer SA-9800 17 сторінок.
Друкувати сторінку
USING THE TAPE DECKS
PLAYBACK
1. As shown in Fig. 11, set the tape monitor switch
to 1 if the tape deck is connected to the TAPE 1
jacks. Set the tape monitor switch to 2 if it is
connected to the TAPE 2 jacks.
. Operate the tape deck controls for playback.
. Adjust the volume with the volume control.
.Set the tone switch to ON
in line with your
preference and adjust the tone with the tone
controls.
m COD
NOTE:
Always set the tape monitor switch to the OFF position
when you are not playing back a tape.
RECORDING
1. Set the function selector to the program source
to be recorded.
2. Set the tape duplicate switch to the OFF posi-
tion.
3, Set recording level by means of the controls on
the tape deck.
4, Operate the tape deck controls and start record-
ing.
NOTE:
The volume,
tone controls,
balance control and loudness
switch have no effect at all on signals from the REC jacks
of the stereo amplifier.
Tape Monitoring
If a recording is being made on a 3-head tape deck,
the recorded sound can be monitored
through the
speaker
system
if the tape monitor switch is set
to 1 or 2. In this case, both recording and playback
connections must be made.
NOTE:
If you have a 2-head open-reel deck or cassette deck, you
will not be able to monitor
the recorded
sound
even
if
you set the tape monitor switch to I or 2, However, you
will be able
to hear
the sound
at the playback
end
(program source).
DUPLICATING AND EDITING RECORDED
TAPES
1. Connect the two tape decks as shown in Fig. 13.
2. When
duplicating
the contents of a recorded
tape in tape deck 1 onto a blank tape in tape
deck 2, set the tape duplicate switch to 1 > 2.
When duplicating from deck 2 to deck 1, set this
switch to 21.
8. When you want to monitor the quality of the
sound
being
recorded,
set the tape monitor
switch to 1 or 2.
PIONEER
Fig. 11
PHONO 2
MM, MC
TUNER
AUX
Tape deck 1
(for playback)
Tape deck 2
(for recording)
Set the tape duplicate switch to 1® 2 when recording from tape
deck 1 to tape deck 2,
Fig. 13
NOTE:
Do not record programs simultaneously on both tape deck
1 and tape deck 2.