Pioneer XC-F10 Інструкція з експлуатації Посібник з експлуатації - Сторінка 14
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Підсилювач Pioneer XC-F10. Pioneer XC-F10 40 сторінок. Stereo cd tuner
Також для Pioneer XC-F10: Посібник з експлуатації (43 сторінок), Посібник з експлуатації (43 сторінок)
Друкувати сторінку
Many of the features of this system are accessed from menus
displayed in the CD tuner's fluorescent display. The advantage
of this is that you can use many of the features using just four
to display the first menu option; 4 and
buttons:
¢ to change the displayed option; and
4
¢
SET
SYSTEM
MENU
Different menu options appear depending on which
component you're listening to; CD, radio, tape, MD, or a
component connected to the auxiliary inputs.
There's another menu, the
in any mode. From the timer menu you can set the clock, as
well as use the wake up, record and sleep timer features. To
display this menu, use the
button.
You should now have your system installed with everything
connected up and plugged in. This chapter takes you through
using the basic features: playing CDs and tapes, listening to
radio stations, and adjusting the volume, tone and balance to
get the sound you want.
First of all, we'll set the clock. This is mainly used for timer
functions, such as the sleep timer, though you can also use
the display as a clock. Unless you unplug the unit, or there's a
power failure, you only need to set the clock once.
to select it.
menu, which is available
button instead of the
TIMER
4
¢
SET
STANDBY/ON
SYSTEM
DISP
CHARA
You can use the
button on the remote control or
button on the top panel of the CD/tuner unit.
The display lights and briefly indicates the current volume
level before showing the current function (e.g. CD).
to display the timer menu, then press 4 or
Press
¢ until
is shown in the display, then
press
.
The display changes to show a date and time, with the day*
part of the date blinking to indicate that you can set it.
• In some areas, the date is shown as year/month/day, with
the year part blinking.
4
¢
Once you've pressed
, the month will start blinking.
Each time you press
, the next part of the date/time will
start blinking. Adjust using the 4 and ¢ buttons.
Pressing
after setting the minute completes the clock
setup.