Pioneer CDJ-850 Посібник із швидкого старту - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Програвач компакт-дисків Pioneer CDJ-850. Pioneer CDJ-850 3 сторінки. Cdj-850 owner's manual (french)
Також для Pioneer CDJ-850: Інструкція з експлуатації Посібник з експлуатації (32 сторінок), (Англійська) Посібник користувача (32 сторінок)

STEP 4.

Insert the USB memory device into the USB

port.

Use the USB memory device onto which the

update file was copied in advance.

STEP 5.

Updating starts automatically.

The message "NOW UPDATING" flashes on

the main unit display and the progress is

indicated on a progress bar. At the same

time, the current version number and the

version number after rewriting are displayed.

Do not disconnect the USB memory device or

turn off the power during updating.

The "COMPLETE! Turn the power off"

message appears after approximately 1min.

This completes the updating procedure.

STEP 6.

Turn the power off and disconnect the USB

memory device.

STEP 7.

Check that the firmware has been updated

to the latest version.

Refer to "Checking the Version" to check

that the firmware is the latest version.

* If updating does not start or if "Updating has failed" is displayed when updating is completed:

The file you have downloaded may be corrupt.

Start over from downloading the firmware update file. If updating is still not possible, the problem

may be with the USB memory device. Try using a different USB memory device.

* If the progress bar does not progress during updating, if the "COMPLETE!" message does not

appear after 5 minutes, or if a message such as "MAIN firmware update failed" appears:

Contact a Customer Support Center.

STEP 3.

Set the update mode.

Eject the disc from the disc insertion slot

and turn the power off. Disconnect the USB

memory device and computer connected to

the CDJ-850.

Next, turn on the power while simultaneously

pressing the [USB] and [RELOOP/EXIT]

buttons.

(Keep pressing until the "POWER ON"

indicator on the main unit display turns off.)

When the message below appears, release

the button.