Ariston AW122 Брошура з догляду, використання та встановлення - Сторінка 14
Переглянути онлайн або завантажити pdf Брошура з догляду, використання та встановлення для Пральна машина Ariston AW122. Ariston AW122 20 сторінок. Washer / washer-dryer combo
Також для Ariston AW122: Брошура з догляду, використання та встановлення (20 сторінок), Посібник з ремонту (20 сторінок), Короткий посібник (21 сторінок)
Друкувати сторінку
Installation Requirements
Drain System Requirements
The washer-dryer can be installed using the standpipe
drain system, floor drain system or the sink drain system.
To prevent siphoning, the outlet end of the drain hose
(provided with unit) MUST be at least 20" (50.8 cm) above
the base of the machine. Not more than 6" (15.24 cm) of
the drain hose should be inserted into the drain pipe.
Floor Standpipe
A
A & B = 25" (62 cm) min. / 34" (86 cm) max.
The standpipe drain requires a minimum diameter stand-
pipe of 1-1/4" (3.2 cm). The minimum carry-away capacity
can be no less than 7 gal (26.5 L) per minute. The top of
the standpipe must be at least 25 in. (62 cm) high and no
higher than 34" (86 cm) from the bottom of the washer.
U-Clamp
20" (50 cm) min.
with an air break
The floor drain system requires a siphon break that may
be purchased separately.
The sink drain system connected to a garbage disposer
requires a "Y" connector (sold separately).
14
Wall Standpipe
B
6" max.
25" (62 cm) min.
34" (86 cm) max.
Sink Drain W/ "Y" Branch Tailpiece
25" (62 cm) min.
with an air break
Cable tie
"Y" Tail Piece
This connection MUST be
before drain trap and at
least 20" (50.8 cm) above
the floor where washer will
be installed.
Floor Standpipe w/ "Y" Branch Tail Piece
Optional
Splendide Faucet Adapter
Kit, Part No. 154187104A
• Supplies water from the
faucet and discharges water
directly into the sink.
• Designed for installations
where washer-dryer hookups
are not available.
Splendide Drain-A-Way™
Pan, Part No. PI-24, PI-22
• Durable, rotomolded pan
with seamless construction
and reinforced corners.
• Fits under the washer.
• Designed to protect against
water damage in the event
of overflow or flooding.
Laundry Sink Drain
20" (51.8 cm) min.
34" (86 cm) max.
Fig. 7
Faucet Adapter Kit, Part No.
154187104A
Drain-A-Way Pan, Part No.
PI-22