Pioneer LaserDisc CLD-1450 Інструкція з експлуатації Посібник з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Програвач компакт-дисків Pioneer LaserDisc CLD-1450. Pioneer LaserDisc CLD-1450 32 сторінки. Cd cdv ld player

Pioneer LaserDisc CLD-1450 Інструкція з експлуатації Посібник з експлуатації
PRECAUTIONS
Eirpceen
| Always remove the disc when this unit is moved or
packed
for transportation.
After
removing
the disc,
return the disc table and turn the power OFF.
INSTALLING THE PLAYER
@
Place a player on a stable platform next to the television
and stereo system to be used with the player.
~
®
When
using the player with
a stereo
system, your
speakers should be placed away from your television (or
TV monitor).
®@ Do not place heavy objects such as a television or TV
monitor on top of the player.
®
Do not piace the player on top of your TV set or TV
monitor. Also, keep the player away from devices such
as Cassette decks which are sensitive to magnetic fields.
When FM or AM stations are being received, signa! noise
may be generated if the player is turned on. Turn off the
player when not in use.
Also, if there is signal noise when receiving radio stations
with an indoor antenna, adjust the position or direction of
the antenna.
INSTALL THE PLAYER IN A WELL VENTILATED
PLACE AWAY FROM HEAT AND HUMIDITY
Do not install the player in a location subject to direct
sunlight,
or near
a stove
or radiator etc.
This could
adversely affect the cabinet and internal components. Also
avoid installing the player in a humid or dusty location. This
could result in a malfunction or accident. Do not install
near a cookstove where the player could be affected by
smoke, steam, or heat.
AVOID SOURCES OF HEAT
Do not put the player on sources
of heat, such as an
amplifier. When
installing with audio components on a
rack, avoid components that generate heat, by placing the
player below such components where there is adequate
ventilation and not much dust.
Avoid
placing
the player on
surfaces
such
as shaggy
carpets, beds, and sofas which may block ventilation under
the player and cause damage.
CAUTIONS
FOR AUTOMATIC
LOADING
OPERATIONS
Since this player has an automatic loading construction,
use the key on the player or the remote
contro! for
opening and closing of the disc table. To avoid damage,
be careful not to apply any force to the moving disc
table.
4
<VRB1022>
Stripe patterns may appear during a TV program
if the
player
unit is turned
on, depending
on the quality of
reception of the TV station. This is neither a malfunction of
the television
nor
the player.
If stripes
appear
while
watching the TV, or when watching the TV for long periods
of time, turn the player off,
CONDENSATION
Moisture will form in the operating section of the player
if the player is brought from cool surroundings into a
warm
room
or if the temperature
of the room
rises
suddenly. When this happens, player's performance will
be impaired.
To prevent
this,
let the player stand
in its new
surroundings for about an hour before switching it on, or
make sure that the room temperature rises gradually,
The same,
symptoms
of condensation
may be caused during
summer,
if the player is exposed
to the breeze
from
an air
conditioner. In such cases change the location of the player.
POWER-CORD CAUTION
Handie the power cord by the plug. Do not pull out the plug by tugging
the cord and never touch the power cord when your hands are wet as
this could cause a short circuit or electric shock. Do not place the unit,
a piece of furniture, etc., on the power cord, or pinch the cord. Never
make a knot in the cord or tie it with other cords. The power cords
should be routed such that they are not likely to be stepped on. A
damaged power cord can cause fire or give you an electrical shock.
Check the power cord once in a while. When you find it damaged, ask
your nearest PIONEER authorized service center or your dealer for a
replacement
CLEANING CARE
Use a soft, dry cloth for cleaning. For stubborn dirt, soak the
cloth in a weak detergent solution; wring well first and
wipe. Use a dry cloth to wipe it dry. Do not use any volatile
agents such as benzene or paint thinner, as it may damage
the surface of the player.