Pioneer PD-M602 Інструкція з експлуатації Посібник з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Програвач компакт-дисків Pioneer PD-M602. Pioneer PD-M602 21 сторінка. Multi-play compact disc player
Також для Pioneer PD-M602: Посібник з експлуатації (33 сторінок)
Друкувати сторінку
IMPORTANT 1
The lightning flash with arrowhead, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO
NOT
OPEN
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT
REMOVE
COVER
(OR
BACK).
NO
USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is.
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying
the appliance.
sand
IMPORTANT 2
'The wires in this mains fead are coloured in accordance
with the following code:
green and yellow
earth
blue
neutral
|
brown
five
ifthe plug provided is unsuitable for your socket outlets,
the plug must be cut off and a suitable plug fitted.
The cut-off plug should be disposed of and must not be
inserted into any 13 amp socket asthis can resultin electric
shock. The plug or adaptor or the distribution panel should
be provided with 13 amp fuse. As the colours of the
wires in the mains lead of this appliance may not
correspond with coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured green and yellow must be
connected to the terminal in the plug which is marked
with the letter E or by the earth symbolt or coloured
green, or green and yellow,
The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or coloured
black.
The wire which is coloured brown must be connected
tothe terminal which is marked with the letter
Lor coloured
red.
NOTE
After replacing or changing a fuse, the fuse cover in the
plug must be replaced with a fuse cover which corresponds
to the colour of the insert in the base of the plug or the
word that is embossed on the base of the plug, and the
appliance must not be used without a fuse cover. Iflost
replacement fuse coverscan be obtained fram your dealer.
This appliance is rated at 13 amps.
Only 13 amp fuses approves to B.S.
1362 A.S.T.A. should be used.
READ INSTRUCTIONS = All the safety and operating
instructions should be read before the appliance is
operated.
RETAIN INSTRUCTIONS — The safety and operating
instructions
should
be
retained
for
future
reference.
HEED WARNING — All warnings on the appliance andin
the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS
— Aji operating and use
instructions should be followed.
WATER AND MOISTURE — The appliance should not
be used near water — for example, near a bathtub,
washbowl,
kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.
LOCATION — The appliance should be installed in a
stable location.
WALL
OR CEILING
MOUNTING
—
The appliance
should not be mounted to a wall or ceiling.
VENTILATION
~ The appliance'should be situated so
that its location ar position does not interfere with
its proper ventitation.
Fer example, the appliance
should notbe situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings: or,
placed in a built-in installation, such as a bookcase
'or cabinet that may impede the flow of air through
the ventilation openings.
HEAT — The appliance should be situated awey from
heat sources such as radiators, heat registers,
stoves, or other appliances (including ampfifiers)
that produce heat.
POWER
SOURCES
— The appliance should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance.
POWER-CORD
PROTECTION
— Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point
where they exit from the appliance.
POLARIZATION
— {f your purchased product is
provided with a polarized power plug, please read
the following instructions. This productis equipped
with a polarized alternating current line plug fa piug
having one blade wider than the other}. This plug
will fit into the power outlet only one way. This is 2
safety feature. if you are unable to insert the plug
fully into the outlet, try reversing the plug. If the
_.plug should still fail to fit, contact
your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
CLEANING — The appliance should be cleaned only
with @ polishing cloth or a soft dry cloth. Never
clean with furniture wax, benzine, insecticides or
other volatile liquids since they may corrode the
cabinet.
POWER LINES — An outdoor antenna should be located
away from power fines.
NONUSE PERIODS — The power cord of the appliance
should be unplugged from the outlet when left
unused for a long period of time.
OBJECT AND LIQUID ENTRY — Care should be taken
so that objects do not fall and liquids are net spilled
into the enclosure through openings.
DAMAGE REQUIRING SERVICE — The appliance
should be serviced by a Pioneer authorized service
center or qualified service personnel when:
The power-supply cord or the plug has been
damaged.
Objects have fallen, or liquid has been s
the appliance.
'The appliance has been exposed to rain.
The appliance does not appear to operate normaily
or exhibits a marked change in performance.
The appliance has been dropped or the enclosure
damaged.
SERVICING — The user should not attempt to service
the appliance beyond that described in the
operating instructions. Al! other servicing shoulé
be referred to qualified service personnel.
led into
GROUND
g
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
GROUND CLAMPS
++——
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
FIG. A
fn
{NEC ART 25
OUTDOOR ANTENNA GROUNDING — If an outside
antenna is connected to the antenna terminal, be
sure the antenne system is grounded so as to
provide some
protection against voltage surges
and built-up static charges.
In the U.S.A. section 810 of the National Electrical
Code. ANSV/NFPA 70, provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection
to
grounding
electrodes.
and
requirements for the grounding electrode. See Fig.
A
CART — An appliance and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn
a
NEC -» NATIONAL
ELECTRIC
GODE
ANTENNA.
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810 — 20}
GROUNDING CONDUCTORS
INEC SECTION 810 — 2%)
50, PART Hj
2
<PRB1184>
En