Pioneer PD-M603 Інструкція з експлуатації Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Програвач компакт-дисків Pioneer PD-M603. Pioneer PD-M603 20 сторінок. Multi-play compact disc player
Також для Pioneer PD-M603: Посібник з експлуатації (31 сторінок)
Друкувати сторінку
CONNECTIONS
e
Make sure that all of the components
are turned off
before making connections.
Stereo amplifier
3
ae
OOO)
White
g
p
Red
Control cable
CD player
L / Output cable
White
me
4
Red
g
Power cord
Cassette deck
CODECK
SYNCHRO
Lf <I
CD-DECK
SYNCHRO cable
Making connections
1. Connect the OUTPUT jacks of this unit to the input
jacks (CD or AUX) of the amplifier. Make sure that
the white plugs are connected to the left (L} jacks
and the red plugs to the right (R) jacks.
e@
Be sure not to connect this unit to the amplifiers
PHONO jacks, as sound will be distorted and normal
playback will not be possible.
2. Connect the power cord to a household AC wall
outlet or an AC outlet on your amplifier.
@
Make sure plugs are inserted fully into the jacks and wall
outlet.
CD-Deck synchro function
lf you have a Pioneer cassette deck provided with the CD-Deck
synchro function, connect the CD-DECK SYNCHRO jacks of the
CD player and cassette deck. With this function, synchro
recording can be carried out between player and deck.
@
For details on connections and operation, refer to the
operating instructions supplied with the cassette deck.
@
The CD-DECK SYNCHRO
cable is not supplied with the CD
player.
NOTE:
!n order to enable the CD-DECK SYNCHRO recording function,
the normal output cable must be connected to the stereo
amplifier.
System remote control with a PIONEER stereo
amplifier that has the i] mark
{Applicable models:
PD-M503 [all models],
PD-M603 [U.S. and Canadian models only],
PD-M703 [U.S. and Canadian models only}.
When a PIONEER stereo amplifier bearing the J mark is used,
connect the CONTROL
IN jack on the rear panel of the CD
player to the CONTROL OUT jack of the amplifier. This will
enabie the CD player to be controlled using the remote control
unit supplied with the stereo amplifier. If you do not plan to
use this feature, it is not necessary to connect CONTROL
IN/OUT jacks.
@
The control cable is supplied with the CD player.
@
The remote control unit supplied with the amplifier can be
used to contro! Play, Stop, Pause, Track/Disc Search and
Disc Change operations.
®
For instructions regarding connections and operation, refer
to the operating instruction manual provided with your
stereo amplifier.
NOTE:
@
When a control cable is connected to the player's CONTROL
IN jack, direct control of the player with the remote control
unit is not possible. Operate the player with the remote
control unit by aiming it at the amplifier. (Except for PD-
M503)
e
Be sure to connect both of the control cable's plugs secure-
ly to the CONTROL IN and CONTROL OUT terminals, Do
not connect only one end of the cable,
e
Be sure to turn off the power of the amplifier before
connecting the power cord and output cable.
Connecting the power cord
Connect the power cord to a household AC wall outlet or an
AC outlet on your amplifier. (See the section "AC power cord
connection and functions" on page 12.)
@
Make sure plugs are inserted fully into the jacks and wall
outlet.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by
tugging the cord and never touch the power cord when your
hands are wet as this could cause a short circuit or electric
shock. Do not place the unit, a piece of furniture, etc., on the
power cord, or pinch the cord. Never make a knot in the cord
or tie it with other cords. The power cords should be routed
such that they are not likely to be stepped on. A damaged
power cord can cause fire or give you an electrical shock.
Check the power cord once in a while. When
you find it
damaged, ask your nearest PIONEER authorized service center
or your dealer for a replacement.
7
<PRB1209>
En