Pioneer PDR-W739 Інструкція з експлуатації Посібник з експлуатації - Сторінка 32
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Програвач компакт-дисків Pioneer PDR-W739. Pioneer PDR-W739 44 сторінки. Compact disc recorder / multi-cd changer
Також для Pioneer PDR-W739: Посібник із швидкого старту (2 сторінок), Посібник із швидкого старту (2 сторінок)
Друкувати сторінку
8 Recording Other Sources
Digital synchro recording
If you have a CD, MD, DAT or DCC player connected to either of the
digital inputs of this recorder, you can make digital recordings
from it very simply using this mode.
Note that double speed recording is not possible in this mode.
1
Make sure that any discs loaded in
the CD changer are stopped.
2
Load a CD–R or CD–RW disc.
If it's a blank disc, the display shows
If the disc isn't blank, use the
there's enough space on it for what you want to record.
3
Press INPUT to choose optical or
coaxial input.
Pressing
INPUT
–
ANALOG
OPTICAL
The recorder's display indicates the current input.
4
If you want to adjust the recording
level:
Start playing a sample of the source material, then turn the
knob to adjust the recording level (clockwise to
REC LEVEL
increase or anticlockwise to reduce). Use the level meter to
guage the the best recording level (the loudest sounds in the
source should just reach 0dB on the meter; the red segments
in the level meter should not light at all).
• Push the
REC LEVEL
means that the recording level will be the same as the
source.
32
◊ÛB¿ˆ≥≤/
COMPACT DISC RECORDER / MULTI-CD CHANGER
3
- COMPACT DISC MULTI CHANGER
NEW DISC
button to check that
DISPLAY
repeatedly switches the active input:
–
COAXIAL
knob to reset the recording level. This
5
Make sure that the source is not
playing, then press SYNCHRO.
Digital synchro recording will not work if the source is
already playing!
Pressing
• 1-track synchro – recorder stops recording when it
encounters a new track number/start ID on the source or 5
seconds of silence.
• all-track synchro – recorder stops recording when it
detects more than 5 seconds of silence in the source
.
material.
• all-track with finalize – as all-track synchro, but the
recorder automatically finalizes the disc after recording.
The
SYNCHRO
when the recorder is ready.
To cancel recording here, press 7.
6
Play the source.
The recorder starts recording automatically.
Press
DISPLAY
7
The recorder goes into record-pause
after recording.
Be careful: In all-track synchro mode, if the recorder
detects another signal, recording starts again.
• If you're using all-track synchro with finalize, the recorder
will start finalizing the disc after a minute of silence.
• Press 7 to finish the recording before ejecting the disc.
If you find that digital synchro recording does not seem
to work, see Digital synchro recording troubleshooting on
page 40 for possible remedies.
COMPACT DISC DIGITAL RECORDER
INPUT
SYNCHRO
CD-R CONTROL
DISP
7
repeatedly switches the synchro mode:
SYNCHRO
indicator and play light will start to blink
to switch displays during recording.
OPEN/CLOSE
0
‡ REC LEVEL
PUSH ON-OFF