Pioneer X-CM325BTD-w Інструкція з експлуатації Посібник з експлуатації - Сторінка 23

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Програвач компакт-дисків Pioneer X-CM325BTD-w. Pioneer X-CM325BTD-w 44 сторінки. Cd reveiver system

Друкувати сторінку

USB playback

Chapter 7:

USB playback

Playing USB storage devices

It is possible to listen to two-channel audio using the USB

interface on the front of this receiver.

• Pioneer does not guarantee that any file recorded on a

USB storage device will play or that power will be

supplied to a USB storage device. Also note that Pioneer

will accept no responsibility whatsoever for loss of files

on USB storage devices caused by connection to this

unit.

Press USB as the input source.

"USB/IPOD" is shown on the main display.

Connect the USB storage device.

The number of folders or files stored on the connected USB

storage device appear on the main display automatically.

• This receiver does not support a USB hub.

• If iPod/iPhone/iPad is connected, the unit will begin

charging.

TIMER

USB storage device

(commercially available)

When the recognition is completed, press

 to start playback.

When changing to a different input source, stop the USB

memory playback first, before changing.

Disconnect USB storage device from the USB

terminal.

Turn the power off before removing the USB storage device.

Note

• This unit may not recognize a USB storage device, play

files or supply power to a USB storage device. For

details, see When a USB storage device is connected on

page 35.

• When a USB storage device is not playing and the unit

has not been operated for 20 minutes or more, the power

will automatically turn off. In this case it is required that

the Auto power off is switched to ON (page 38).

Repeat play

Repeat play can play one track, all tracks or a programmed

sequence continuously.

To repeat one track:

Press REPEAT repeatedly until "RPT ONE" appears. Press

ENTER.

To repeat all tracks:

Press REPEAT repeatedly until "RPT ALL" appears. Press

ENTER.

To repeat desired tracks:

Perform steps 1 - 5 in "Programmed play" section on page 21

and then press REPEAT repeatedly until "RPT ALL" appears.

Press ENTER.

To cancel repeat play:

Press REPEAT repeatedly until "RPT OFF" appears. Press

ENTER.

Note

• After performing repeat play, be sure to press .

VOLUME

Otherwise, the file of USB storage device will play

continuously.

• During repeat play, random play is not possible.

Random play

The file of USB storage device can be played in random order

automatically.

To random play all tracks:

Press RANDOM repeatedly until "RDM ON" appears. Press

ENTER.

To cancel random play:

Press RANDOM repeatedly until "RDM OFF" appears. Press

ENTER.

Note

• If you press the  during random play, you can move

to the track selected next by the random operation.

• In random play, the unit will select and play tracks

automatically. (You cannot select the order of the

tracks.)

• During random play, repeat play is not possible.