Pioneer AVH-X7700BT Інструкція з оновлення мікропрограми системи - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з оновлення мікропрограми системи для DVD-плеєр Pioneer AVH-X7700BT. Pioneer AVH-X7700BT 6 сторінок. Dvd rds av receiver
Також для Pioneer AVH-X7700BT: Посібник із швидкого старту (8 сторінок), Інструкція з оновлення мікропрограми системи (6 сторінок)

A. Downloading the Firmware Update Files

1. Download the firmware update files by clicking on the following link and finding your product:

pioneerelectronics.com/firmware

2. Extract the download file.

The Downloaded zip file will produce the following file when decompressed: （See the table below）

AVH-X7700BT

AVH-X6700DVD

B. Updating the Firmware on Your Unit

IMPORTANT

AVH-X7700BT

AVH-X6700DVD



DO NOT perform this firmware update if the model number of your Pioneer DVD Receiver is anything other

than one of the above models.



Ensure that the update file is located within the root (top) folder of your USB storage device. There should be

no other files within the USB storage device.



While your unit is being updated, DO NOT turn off the system's power and DO NOT touch the unit's

touchscreen as this may result in severe damage to your unit.



DO NOT remove the USB storage device during the firmware update process.



Disconnect any external mobile devices that are currently connected to your unit.

PROCEDURE

1. Connect a blank (formatted) USB storage device to your computer, and then locate and copy the

"PEH***C.AVH" file onto the USB storage device.（See the table below）

AVH-X7700BT

AVH-X6700DVD

2. Start the vehicle engine.

3. Connect the USB storage device to the USB input on your unit.

4. Press the [Home] button.

5. Touch the [AV source] & touch [Off] to source

PEH447C.AVH

Off.