Pioneer AVX-P7650DVD Посібник з монтажу - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник з монтажу для DVD-плеєр Pioneer AVX-P7650DVD. Pioneer AVX-P7650DVD 20 сторінок.

Друкувати сторінку

Installation

DIN Rear-mount

Installation using the screw holes on

the side of the unit

• Fastening the unit to the factory

radio mounting bracket. (Fig.

14) (Fig. 15) (Fig. 16)

Select a position where the screw holes

of the bracket and the screw holes of

this product become aligned (are fit-

ted), and tighten the screws at 2 places

on each side. Use any of binding

screws (4 × 3 mm), binding screws (5

× 6 mm) or flush surface screws (5 × 6

mm), depending on the shape of the

screw holes in the bracket.

*1 Use binding screws (4 × 3 mm) only.

* 1

• When installing in a shallow space,

use the following screw holes. In

this case, stick conceal tape on parts

that protrude from the dashboard.

* 1

Fig. 14

Conceal tape

Fig. 15

Factory radio mounting

bracket

Switching the operation mode

This unit features two operation

modes: the IP-BUS mode (S) and the

ADD-ON mode (M). Switch the mode

according to the combined compo-

nents.

• IP-BUS mode (S) – Using with a

Pioneer head unit featuring an IP-

BUS input or multi-channel proces-

sor control unit

• ADD-ON mode (M) – Using with a

car stereo featuring RCA audio

inputs or FM reception capability

• Use a thin standard tip screw-

driver to switch the operation

mode switch on the back of this

unit. (Fig. 17)

• After switching, reset the micro-

processor.

Screw

Dashboard or

Console

Fig. 16

Fig. 17