Pioneer DV-585K-s Інструкція з експлуатації Посібник з експлуатації - Сторінка 40
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для DVD-плеєр Pioneer DV-585K-s. Pioneer DV-585K-s 44 сторінки. Pioneer dv-585k-s
Друкувати сторінку
08
Additional information
Setting the TV system
The default setting of this player is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO. If you experience picture distor-
tion with some discs, set the TV system to
match your country or region's system. Doing
this, however, may restrict the kinds of disc you
can watch. The table below shows what kinds
of disc are compatible with each setting
(AUTO, PAL and NTSC).
1
If the player is on, press
ON to switch it to standby.
2
Using the front panel controls, hold
down
then press
switch the TV system.
The TV system changes as follows:
• AUTO
NTSC
• NTSC
PAL
• PAL
AUTO
Note
• You have to switch the player into standby
(press
STANDBY/ON) before each
change.
Disc
Type
DVD/Super
VCD/Video CD/
DivX Video
CD/MP3/WMA/
JPEG
no disc
Resetting the player
Use this procedure to reset all the player's
settings to the factory default.
1
Switch the player into standby.
40
En
STANDBY/
STANDBY/ON to
Player setting
Format NTSC PAL AUTO
NTSC
NTSC PAL NTSC
PAL
NTSC PAL PAL
NTSC
—
NTSC PAL
or PAL
2
Using the front panel buttons, hold
down the
(stop) button and press
STANDBY/ON to switch the player back
on.
All the player's settings are now reset.
DVD-Video regions
All DVD-Video discs carry a region mark on the
case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD player also has a region mark,
which you can find on the rear panel. Discs
from incompatible regions will not play in this
player. Discs marked ALL will play in any
player.
The diagram below shows the various DVD
regions of the world.
1
2
4
Selecting languages using the
language code list
Some of the language options (such as 'DVD
Language' in the Setup Navigator) allow you to
set your preferred language from any of the 136
languages listed in the language code list on
page 41.
1
Select 'Other Language'.
2
Use the
(cursor left/right) buttons
to select either a code letter or a code
number.
3
Use the
(cursor up/down) buttons
to select a code letter or a code number.
See Language code list on page 41 for a
complete list of languages and codes.
5
1
6
2
3
5
2
4