Pioneer PRV-LX1 Оновлення системи - Сторінка 5

Переглянути онлайн або завантажити pdf Оновлення системи для DVD-плеєр Pioneer PRV-LX1. Pioneer PRV-LX1 10 сторінок. Dvd-video recorder
Також для Pioneer PRV-LX1: Інформаційний бюлетень про продукцію (5 сторінок), Швидкий старт (5 сторінок), Додатковий посібник (1 сторінок), Посібник з командного протоколу (20 сторінок), Посібник з протоколу (14 сторінок), Редагувати список рішень (6 сторінок), Посібник з програмного забезпечення (24 сторінок), Обслуговування (5 сторінок), Інформаційний бюлетень про продукцію (6 сторінок), Інструкція з експлуатації Посібник з експлуатації (38 сторінок), Посібник з оновлення (2 сторінок), Оновлення системи (10 сторінок), Навчальний посібник (38 сторінок), Посібник (38 сторінок)

Pioneer PRV-LX1 Оновлення системи
Play Non-Finalized DVD-R/RW Disc
PRV-LX1 recorders with system version 2.04/1.03 or higher
can play non-finalized DVD-R/RW discs that have been
recorded by the LX1.
Unfinalize DVD-RW disc
Note: "Unfinalized" does not equal "Non-Finalized." Unfinalize
is the action which removes finalization data from a DVD-RW
(rewritable) disc and prepares it for additional recording.
Enable the function to unfinalize a DVD-RW disc recorded
by an LX1 with system software 2.04/1.03 or higher.
Note 1: DVD menu settings are lost and default menu setting
is applied since disc menu info is not maintained once disc is
finalized
Note 2: DVD-RW finalized by a previous LX1 version cannot
be unfinalized
Note 3: Blank DVD-RW disc always formats automatically after
recording starts.
Note 4: The unfinalization process is not possible if both DVD1
& DVD2 target drives are selected because LX1 cannot
accurately determine if two unfinalized discs are exactly the
same.
Improvements to Trimming Video
Video clips that are recorded to the internal HDD and are
greater than 4.7GB can be trimmed by the user to any size.
Previously, video clips recorded to the HDD had to be
trimmed to clips size 4.7GB or less (to fit on a DVD).
the resulting trimmed clip size is dependent on the
remaining capacity of the internal HDD. If there is equal to
or greater capacity on the HDD, the new clip can be any
size.
When the new clip is made, the name of the clip is the old
name preceded by an asterisk (*). The user can change the
name of the new clip in the GUI by selecting:
Edit->Title->Info/Rename.
Now
- 5 -