Pioneer V7400 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для DVD-плеєр Pioneer V7400. Pioneer V7400 4 сторінки. Remote control panel software

All the controls and DVD information are independent for each DVD player.

A. DVD Number with DVD Title

By double clicking a DVD control frame (but not the controls on it) a widow will pop-up

allowing naming and editing DVD title. Up to 20 characters allowed.

B. Start Time

Sets the time that will make DVD player go to play mode. If incorrect time was entered, once

the box loses focus (by pressing anything else), its background will turn orange. Timer has

one-second resolution.

C. Current Frame

Displays current frame number. The current frame number is received from DVD player. If

any button on DVD player is pressed or its interface is used, program will follow and display

incoming frame number.

D. Elapsed Time

Displays elapsed time. The elapsed time is received from DVD player. If any button on DVD

player is pressed or its interface is used, program will follow and display incoming elapsed

time.

E. Remaining Time

Displays time remaining to the end of current title. It is being calculated out of total frame

number, current frame and current frame rate (25(PAL), 30 (NTSC) or Auto)

F. DVD Controls

In order: Scan Reverse, Step Reverse, Play, Still, Pause, Step Forward, Scan Forward.

Pressing Play, Stop or Pause will illuminate them to mark the mode of DVD player. If any

button is pressed on the DVD player device or its interface is used, appropriate button will

illuminate to mark current mode (Play, Still and Stop only)

G. DVD View Selection Buttons

Available in compact view only. In Dual View mode (not shown), two DVD control frames

are displayed next to each other (left-right). Displayed DVD number can be chosen from the

menu or with function keys (F1-F4 for the left side and F5-F8 for the right). Not two same

DVD control frames can be shown on both sides. For both modes, dual and compact, timer

function is operational even if DVD control is not visible.

DESCRIPTION