Pioneer MLXTW Посібник з експлуатації - Сторінка 34

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Акустична система Pioneer MLXTW. Pioneer MLXTW 36 сторінок.

7. GENERAL INFORMATION

7.1 DISAASEMBLY

Removing the Amplifier Assy

1 ) The Amplifier Assy is attached to the cabinet by 4 external

screw 1. To detach it, pull down the subwoofer toward the

left side. Then unfasten those screws 1 (× 4)

2 ) Stand up the speaker again. After unfastening the rear panel

screw 2 (× 8), pull straight the Amplifier Assy toward back

about 13cm. Then remove the connecting cord of PWS Assy

and LED Assy. Next, pull out the Amplifier Assy and remove

the speaker cords.

SPEAKER LEVEL

OUTPUT

INPUT

Rear Panel

When mouting the Amplifier Assy, be sure to

make the binding process for the speaker cord,

power SW cord, and LED cord by the binder.

Screw 1

Amplifier Assy

3 ) The PWS Assy and LED ASSY is attached to the front panel by

each 2 screws. To detach them, remove the Amplifier Assy

first. Then unfasten each screws from the cabinet back side.

When mounting, be sure to make the binding process

for the Power SW cord and LED cord by vinyl tape.

Removing the Subwoofer

1 ) The speaker element is attached to the back board by 4 external

screws 3 and washers. To detach it, unfasten those screws and

washers.

2 ) When attaching the speaker, face its terminal downward.

(Screws must be used with washers.)

LINE LEVEL

OUTPUT

SPEAKER LEVEL

LINE LEVEL

INPUT

Removing the Front Panel

The front panel is attached to the baffle by press-fitting.

To detach it, pry it open by inserting a flat blade screwdriver

into lower side.

S-W80S

LED ASSY

PWS ASSY

200

OUTPUT

INPUT