Pioneer PDSP-1 Інструкція з експлуатації Посібник з експлуатації - Сторінка 38

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Акустична система Pioneer PDSP-1. Pioneer PDSP-1 44 сторінки. Pioneer digital sound projector operating instructions pdsp-1

Друкувати сторінку

Troubleshooting

Many malfunctions can be the result of operating errors. If you experience trouble with the digital sound projector,

use this troubleshooting guide together with thorough checks of the other components in your system. If the problem

is not corrected after doing so, consult your authorized service center.

Sound

No sound

Problems?

Sound has a poor surround effect

Sound has poor balance

No sound from the connected sub-woofer, or sound volume is too low

Recording isn't possible on the connected components

Video

Digital sound projector menu screens don't appear

Problems?

No image is visible on the connected TV monitor.

Table of Remote Control Unit Menu

Displays

Use the remote control unit's PDSP menu to check INPUTs 1-5, and

confirm you have selected the correct input.

Check the front panel VOLUME LEVEL indicator to confirm whether the

MUTE button has been pressed, or if the sound volume has been set to its

minimum setting.

Confirm that the digital sound projector's main power is turned ON and

that the front panel's POWER ON indicator (Blue) is lighted.

Confirm whether the audio mode has been set to "Mono" for monaural

sound.

Confirm whether the audio mode has been set to "Stereo" for stereo sound.

Check the playback source to confirm that it is a multi-channel source.

Confirm that the proper room sound setting has been chosen.

If the digital sound projector has been physically moved, or if the furniture

in the room been significantly rearranged or changed, consult your

installation technician to have the digital sound projector recalibrated for

the new room environment.

Confirm whether the sub-woofer's output level has been set low.

If the playback source is a digital signal, it may be protected with a

copyguard function, in which case it cannot be recorded. In this case, use

an analog connection between the playback component and recording

component, and record the source in analog mode.

Confirm that the proper video input has been selected on the television

monitor.

Confirm that the proper video input has been selected on the television

monitor.

Index

P19

P10

P26

P25

P32

P30