Ariston 47-166-32 Посібник користувача, інструкції з монтажу та обслуговування - Сторінка 32

Переглянути онлайн або завантажити pdf Посібник користувача, інструкції з монтажу та обслуговування для Водонагрівач Ariston 47-166-32. Ariston 47-166-32 50 сторінок.

Друкувати сторінку

10. SERVICING INSTRUCTIONS

To ensure efficient safe operation, it is recommended that the

boiler is serviced annually by a competent person.

Before starting any servicing work, ensure both the gas and

electrical supplies to the boiler are isolated and the boiler is

cool.

Before and after servicing, a combustion analysis should be

made via the flue sampling point (please refer to S

further details).

After servicing, preliminary electrical system checks must be car-

ried out to ensure electrical safety (i.e. polarity, earth continuity,

resistance to earth and short circuit).

10.1

Replacement of Parts

The life of individual components vary and they will need servic-

ing or replacing as and when faults develop.

The fault finding sequence chart in S

which component is the cause of any malfunction, and instruc-

tions for removal, inspection and replacement of the individual

parts are given in the following pages.

10.2

To Gain General Access

All testing and maintenance operations on the boiler require the

control panel to be lowered. This will also require the removal of

the casing.

10.2.1 Removing the front panel

1. Loosen the fastening screws "A" of the control panel located

on the lower part of the panel itself. (F

. 10.1

. 10.2

Supplied By www.heating spares.co Tel. 0161 620 6677

3.4 for

ECTION

7 will help to locate

ECTION

. 10.1);

. 10.3

2. The control panel moves downward and when pulled forward,

rotates on two lateral hinges; the panel stays in a semi-hori-

zontal position, which allows access to the inner parts of the

boiler (F

. 10.2);

3. In order to increase the manoeuvring space, it is possible to

raise the control panel and rotate it to a fully horizontal posi-

tion (F

. 10.3);

4. Remove the screws "B" from the front panel bottom lip

. 10.4);

5. Lift the front panel up and forward from the raised screws at the

the top of the casing (F

. 10.4

. 10.5).

. 10.5