Aeotec ZW162 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари Aeotec ZW162. Aeotec ZW162 7 сторінок.

Aeotec ZW162 Посібник користувача
1. Affix Doorbell 6 Wall Mount Plate in any desired location near an outlet.
a. Use 3x 20mm screws or double-sided tape.
b. Lock the Doorbell 6 into place where the mount is installed.
How to install Button
Avoid exposing Button to direct sunlight where possible to avoid UV damage and reduced battery performance.
1. Select an installation location for Button. Do not yet install it.
2. Power on Button. a. Remove the 2 screws from Button's rear to open its battery cover and install the provided
CR2450 battery with the positive (+) on top. b. Replace the battery cover and the 2 screws.
3. Test the wireless connection by pressing Ring Button to trigger a doorbell alert. Select an alternative installation
location for Chime if the connection is poor.
4. Install Button. a. Affix the mounting plate to the selected surface; affix it using either 2 × 20mm screws or double-