Dini Argeo HLD150 Посібник з експлуатації - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Ваги Dini Argeo HLD150. Dini Argeo HLD150 13 сторінок. Laboratory scale, industrial weighing systems

Друкувати сторінку

CALIBRATION WEIGHTS

MODEL

1° SAMPLE WEIGHT 50g

2° SAMPLE WEIGHT 100g

3° SAMPLE WEIGHT 150g

P2 CAL CALIBRATION WITH FREE SAMPLE WEIGHT

By pressing ZERO it's possible to access the calibration with free sample weight.

The display shows "UNLOAD";

Empty the platter, after Stable indicator on the weight will be acquired automatically;

Set the value of the mass weight by using the MODE key to clear the value, the TARE key to increase the value

of the digit, the PCS key to go on the previous digit and the % key to go on the following digit.

Confirm the entered value with ZERO; the display shows "LOAD";

Put the mass on platter, after stable indicator on the weight will be acquired automatically.

The indicator returns to weighing.

P3 Cnt A/D CONVERTER POINTS

By pressing ZERO the instrument shows the A/D converter points relative to the weight on the scale.

Press PRINT/M+ to exit the step.

P4 AZ

ZERO TRACKING

By pressing ZERO one sets the divisions' number for the zero tracking, in other words, scale's thermal drift

compensation parameter; the set value corresponds to the number of divisions which is cleared.

Press MODE to select one of the suggested divisions: oFF, 0.5d, 1d, 2d, 4d.

P5 GrA GRAVITY COEFFICIENT

Trough this step one access the acceleration value setting of instrument calibration and use zone.

Manual entry of the g value: Set the value by using the MODE key to clear the value, the TARE key to increase the

value of the digit, the PCS key to go on the previous digit and the % key to go on the following digit; one must modify

all the 6 digits of the gravitational acceleration. Confirm the entered value with ZERO or press PRINT/M+ to exit

the step.

P6 CAP SCALE CAPACITY

By pressing ZERO one selects the total capacity of the scale.

Press MODE to select one of the suggested divisions: 150, 300, 600, 1500, 3000, 6000 g.

HLD150

HLD300

100g

200g

300g

HLD600

HLD1500

200g

500g

400g

1000g

600g

1500g

HLD3000

HLD6000

1000g

2000g

4000g

3000g

6000g