Aeotec Z-Pi 7 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Контролер Aeotec Z-Pi 7. Aeotec Z-Pi 7 7 сторінок.

03/02/2021

OS: Linux - Raspian "Stretch" or higher:

The Z-Pi7 uses the same port as Bluetooth. To use Z-Pi 7, you must deactivate Bluetooth.

1.1.1. Open an SSH connection to your system, use Putty (Link

(https://www.chiark.greenend.org.uk/~sgtatham/putty/)

link: SSH Putty to RPi

putty/)

1.1.2. Enter the user "pi".

1.1.3. Enter your password "raspberry"(standard).

1.1.4. Now enter the following command.

sudo nano /boot/config.txt

1.1.5. Add the following line depending on the hardware version of RPi that you are using.

Raspberry Pi 3

dtoverlay=pi3-disable-bt

Raspberry Pi 4

dtoverlay=disable-bt

1.1.6. Exit the Editor with Ctrl X and save with Y.

1.1.7. Reboot the system with:

sudo reboot

1.1.8. Login with SSH again, enter your username and password.

1.1.9. Check if the port ttyAMA0 is available with:

dmesg | grep tty

https://aeotec.freshdesk.com/support/solutions/articles/6000230551-z-pi-7-user-guide-

(https://raspberrypi4dummies.wordpress.com/2013/03/17/connect-to-the-raspberry-pi-via-ssh-

Z-PI 7 User Guide : Aeotec Help Desk

), you can find out how to connect Putty to RPi in this

3/7