3Com TokenLink 3C359B Примітка до випуску - Сторінка 2

Переглянути онлайн або завантажити pdf Примітка до випуску для Мережева карта 3Com TokenLink 3C359B. 3Com TokenLink 3C359B 4 сторінки. Pci network interface card
Також для 3Com TokenLink 3C359B: Посібник із швидкого старту (8 сторінок)

Друкувати сторінку

OKEN

INK

Windows 95 version 950 requires that the NDIS 3 driver be

loaded for the 3C359B NIC. The instructions in this section

replace those shown in the 3Com TokenLink Velocity XL PCI

Network Interface Card User Guide for installing the NDIS 3

driver from the TokenDisk diskette or the TokenLink

Velocity XL CD.

Installing the NDIS 3 Driver

To install the NDIS 3 driver for the 3C359B NIC, you must

specify the complete path to the driver ﬁle on the TokenDisk

diskette or TokenLink Velocity XL CD.

First, install the NIC and turn on the PC as described in the

user guide. After selecting Driver from disk provided by

hardware manufacturer in the New Hardware Found

window, continue by following these steps:

1 If you are using the 3.5-inch diskettes, insert

TokenDisk diskette 2 in the drive. If you are using the

TokenLink Velocity XL CD, insert it in the CD-ROM

drive.

2 At the prompt, enter the appropriate path for the

drive containing your TokenDisk diskette or

TokenLink Velocity XL CD and the NDIS 3 driver.

3 Click OK.

Continue with the driver installation instructions as

presented in the user guide.

XL PCI N

ELOCITY

If you are using the 3.5-inch TokenDisk diskettes, enter:

a:\nt351

If you are using the TokenLink Velocity XL CD, substitute

the appropriate drive (drive D, for example) and the

DISK_2 designation in the path as follows:

d:\disk_2\nt351

ETWORK

NTERFACE

ARD

ELEASE

OTES