Whirlpool 8003437232718 Посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник для Пральна машина Whirlpool 8003437232718. Whirlpool 8003437232718 8 сторінок.

Друкувати сторінку

When installing the appliance make sure that

the four feet are stable and resting on the floor,

adjusting them as required, and check that the

appliance is perfectly to level using a spirit level.

If the appliance is being installed on wood or

"floating" floors (certain parquet and laminate

materials), secure a 60 x 60 x 3 cm (at least) sheet

of plywood to the floor then place the appliance

on top of this.

Connect the water inlet hose(s) to the water

supply in accordance with the regulations of your

local water company.

For cold fill only models: do not connect to the

hot water supply.

For models with hot fill: the hot water inlet

temperature must not exceed 60 °C.

The washing machine is fitted with transport

bolts to prevent any possible damage to the

interior during transport. Before using the

machine, it is imperative that the transport bolts

are removed. After their removal, cover the

openings with the 4 enclosed plastic caps.

After installation of the device, wait a few

hours before starting it so that it acclimates to the

environmental conditions of the room.

Make sure that the ventilation openings in

the base of your washing machine (if available

on your model) are not obstructed by a carpet or

other material.

Use only new hoses to connect the appliance

to the water supply. The old hose-sets should not

be reused.

The supply water pressure must be in the 0.1-1

Mpa range.

ELECTRICAL WARNINGS

It must be possible to disconnect the

appliance from the power supply by unplugging

it if plug is accessible, or by a multi-pole switch

installed upstream of the socket in accordance

with the wiring rules and the appliance must be

earthed in conformity with national electrical

safety standards.

Do not use extension leads, multiple sockets

or adapters. The electrical components must not

be accessible to the user after installation. Do not

use the appliance when you are wet or barefoot.

Do not operate this appliance if it has a damaged

power cable or plug, if it is not working properly,

or if it has been damaged or dropped.

If the supply cord is damaged, it must

be replaced with an identical one by the

manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard - risk

of electric shock.

CLEANING AND MAINTENANCE

WARNING: Ensure that the appliance is

switched off and disconnected from the power

supply before performing any maintenance

operation; never use steam cleaning equipment -

risk of electric shock.

DISPOSAL OF PACKAGING MATERIALS

The packaging material is 100% recyclable and is marked with the

recycle symbol

The various parts of the packaging must therefore be disposed of

responsibly and in full compliance with local authority regulations

governing waste disposal.

DISPOSAL OF HOUSEHOLD APPLIANCES

This appliance is manufactured with recyclable or reusable materials.

Dispose of it in accordance with local waste disposal regulations.

For further information on the treatment, recovery and recycling

of household electrical appliances, contact your local authority,

the collection service for household waste or the store where you

purchased the appliance. This appliance is marked in compliance

with European Directive 2012/19/EU, Waste Electrical and Electronic

Equipment (WEEE). By ensuring this product is disposed of correctly,

you will help prevent negative consequences for the environment and

human health.

The symbol

on the product or on the accompanying documentation

indicates that it should not be treated as domestic waste but must be

taken to an appropriate collection center for the recycling of electrical

and electronic equipment.