Whirlpool ALA 103 Інструкція з експлуатації Посібник з експлуатації - Сторінка 15

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Пральна машина Whirlpool ALA 103. Whirlpool ALA 103 20 сторінок.

Друкувати сторінку

INSTALLATION

DRAINAGE CONNECTION

The machine is supplied with a drainage hose attached,

which must be connected to a drain. See the examples

below. The height must be 600-900 mm above ﬂ oor level.

The lower position (600 mm) is always preferable. Ensure

that the drainage hose has no kinks.

600-900 mm

The machine can also be connected to the drain via a

spigot connection. In this case the hose should also be

600-900mm above the ﬂ oor. The internal diameter of the

hole should be at least 18 mm.

• Cut the nipple

• Remove burrs from the hole.

See the illustration.

At least 18 m

ELECTRICAL INSTALLATION

If the machine is delivered from the factory with a plug

attached it can be connected to an earthed wall socket.

Otherwise, a permanent connection using a multipolar

circuit breaker must be made by a qualiﬁ ed professional.

Connection on delivery

The machine comes with 3-Phase, 400 V, 50 Hz, heat

output 4400 W and fused 10 A. If a residual current

device is being used, this should be type A.

NOTE!

Repairs and maintenance relating to safety or

performance must be carried out by a qualiﬁ ed

professional.