Whirlpool AWG 1112 S/PRO Щоденний довідник - Сторінка 8

Переглянути онлайн або завантажити pdf Щоденний довідник для Пральна машина Whirlpool AWG 1112 S/PRO. Whirlpool AWG 1112 S/PRO 41 сторінка.

Друкувати сторінку

FUNCTIONS

Rinse hold (option on Spin button)

Avoids automatic spinning of the laundry at the end of the

programme. The laundry remains in the last rinse water and

the programme does not continue.

Suitable for delicate laundry which is not suitable for spinning, or

which should be spun with a lower spin speed. Not suitable for silk.

To end the "Rinse hold" function, choose between:

• drain the water, no spin:

turn the knob to select spin speed "0", then press "Start/

Pause": The water will be drained and the programme

ended

• spin the laundry:

the default spin speed flashes – start the spin cycle by

pressing "Start/Pause".

Or select a different spin speed by turning the knob, press

it to confirm, and press "Start/Pause".

Start delay

Moves the start of your programme to a later time.

Do not use liquid detergent with this function.

• Select programme, temperature and options.

• Press the "Start delay" button – the start delay symbol on the

display flashes.

• Turn the knob to select a delay of up to 23 hours, which will be

shown on the display. Confirm by pressing the knob.

• Press "Start/Pause" – the countdown for the delay starts. The colon

on the display flashes. The door locks.

• If you have selected Dosing Aid: When you press "Start/Pause", the

washing machine calculates the recommended detergent

amount. Add detergent as indicated on the display (see "Dosing

Aid"). Press "Start/Pause" again to start the countdown for the

selected delay period.

• After the delay time has been reached, the washing machine starts

automatically. The display then indicates the remaining

programme duration.

To cancel "Start delay":

• Press "Start/Pause" to cancel start delay.

MAINTENANCE AND CLEANING

AND TROUBLESHOOTING

For maintenance and cleaning, and for

troubleshooting, see the

Use and Care Guide.

The product literature can alternatively be

obtained as follows:

• Download from the Whirlpool Website

http://docs.whirlpool.eu

Whirlpool® is a registered trademark of Whirlpool, USA

Key lock

Locks the buttons and the knob on the control panel

against unwanted operation.

To lock the buttons:

• The washing machine must be switched on.

• Press and hold the option button until the key symbol on

the display lights up. The knob and the buttons are now

locked. Only "On/Off" works.

If you switch the washing machine off and on again, the key

lock remains active until you unlock it.

To unlock the buttons, press and hold the option button

again, until the key symbol on the display goes off.

INDICATORS

Door can be opened.

Failure: Water tap closed. The washing machine has

no/insufficient water supply.

Failure: Water filter clogged. Water cannot be drained;

water filter might be blocked

Failure: Call Service. Refer to Troubleshooting section in

the Use and Care Guide.

In the event of any failures, refer to the Troubleshooting section in

the "Use and Care Guide".

CONTACTING AFTER-SALES SERVICE

Provide both numbers shown on the service sticker inside the door

when contacting the After-Sales Service team.

http://www.whirlpool.eu

The phone number can be found in the warranty booklet.

IF THE WASHING MACHINE APPEARS TO BE DAMAGED,

CONTACT THE OWNER AND, IF NECESSARY, THE AFTER-SALES

SERVICE.

400011163708A

001