Whirlpool AWM8121 Посібник з експлуатації - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Пральна машина Whirlpool AWM8121. Whirlpool AWM8121 22 сторінки. Front load washing machine
Друкувати сторінкуWHIRLPOOL CONSUMER SERVICES
FAULT DIAGNOSIS
1.
The diagnostic tests must be performed on the machine without a wash load because the
out of balance detection system is disabled.
2.
Set the cycle selector to "DRAIN"
3.
Press the :
a)
"RINSE HOLD" button twice
b)
"INTENSIVE RINSE" button twice
c)
"START" button once,
4.
The control panel will now display :
•
Temperature 60°C (Does not change for duration of the test sequence).
•
1200 speed LED on (Does not change for duration of the test sequence).
•
"PREWASH" programme sequence LED on
•
"WASH" programme sequence LED on
•
"RINSE" programme sequence LED on
•
"RINSE HOLD" programme sequence LED on
•
"DRAIN/SPIN" programme sequence LED on - (This is Step 1 in the Table over)
5.
Drain pump runs for approximately six seconds and the test sequence automatically
advances to Step 2.
6.
By pressing the Prewash button once, the timer advances to step 3
Model AWM8121
Page 18 of 22