Whirlpool WASHER Інструкція з монтажу Посібник з монтажу - Сторінка 2

Друкувати сторінку

Whirlpool WASHER Інструкція з монтажу Посібник з монтажу

INsTaLLaTION reQUIreMeNTs

TOOLS AND PARTS

Gather the required tools and parts before starting installation.

Tools needed:

Adjustable or open end

wrench

" (14 mm)

4" min

(102 mm)

Wood block

Pliers that open to 1

⁄

(39.5 mm)

Optional tools:

Flashlight

Parts supplied:

NOTE: All parts supplied for installation are in

washer basket.

Beaded Tie Strap

Drain hose form

Level

Ruler or measuring tape

Bucket

Front leveling feet with

jam nuts (2)

Parts needed:

(Not supplied with washer)

Inlet hoses with flat washers

To order, please refer to toll-free phone numbers on front page

of your Washer User Instructions.

8212656RP

10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)

8212641RP

5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)

8212646RP

4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)

8212545RP

5 ft. (1.5 m) Inlet hose, Red and Blue EPDM

(2 pack)

8212487RP

5 ft. (1.5 m) Nylon braided inlet hose (2 pack)

8212638RP

6 ft. (1.8 m) Nylon braided inlet hose, space

saving 90° elbow, hypro-blue steel couplings

(2 pack)

8212637RP

6 ft. (1.8 m) Inlet hose, Black EPDM, space

saving 90° elbow, hypro-blue steel couplings

(2 pack)

Alternate parts:

(Not supplied with washer)

Your installation may require additional parts. To order, please

refer to toll-free numbers on front page of your Washer User

Instructions.

If you have:

Overhead sewer

Drain hose too short

Lint clogged drain

LOCaTION reQUIreMeNTs

Select proper location for your washer to improve performance and

minimize noise and possible "washer walk". Install your washer in

a basement, laundry room, closet or recessed area.

27"

(686 mm)

42"

(1067 mm)

You will need:

Standard 20 gal. (76 L) 39"

(991 mm) tall drain tub or utility

sink, sump pump and connectors

(available from local suppliers)

Kit Part Number 280131

Drain protector,

Part Number 367031

(648 mm)