Whirlpool 3ET18DK Інструкція з використання та догляду - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція з використання та догляду для Холодильник Whirlpool 3ET18DK. Whirlpool 3ET18DK 26 сторінок. No-frost refrigerator-freezers
Також для Whirlpool 3ET18DK: Інструкція з використання та догляду (16 сторінок), Інструкція з використання та догляду (20 сторінок)
Друкувати сторінкуRemoving
the crispers
and crisper
cover
To remove
the crispers:
1. Slide the crisper straight out to the stop.
2. Lift the front.
3.
Slide out the rest of the way.
4. Replace in reverse order.
To remove
the cover:
1. Push up glass insert from the bottom,
then slide it out with both hands.
2. Lift front of cover frame.
3. Pull cover frame up and out.
4. Remove metal cover support.
To replace
the cover:
1.
Replace metal cover support on wall
supports in front section of cabinet.
2. Fit back corners of cover frame into notch
supports on walls of refrigerator, then
lower front onto metal cover support.
3. Slide back of glass insert into cover
frame. Then lower front to level position.
Pull out to the
stop, lift the front
and pull again.
Remove the
glass insert.
Lift front of
cover frame,
then the
back.
Adjusting
the crisper
humidity
control
You can control the amount of humidity in
the moisture-sealed
crisper.
l
Adjust the control to any setting between
LOW and HIGH.
l
LOW (open) lets moist air out of the crisper
for best storage of fruits and vegetables
with skins.
l
HIGH (closed) keeps moist air in the
crisper for best storage of fresh, leafy
vegetables.
12