Whirlpool 4322658A Посібник - Сторінка 27

Переглянути онлайн або завантажити pdf Посібник для Холодильник Whirlpool 4322658A. Whirlpool 4322658A 48 сторінок. In-door ice system

Open the freezer door and actuate the

freezer door switch 3 times. NOTE: This

step must be completed within 10 sec-

onds of opening the freezer door.

Close the freezer door within 20 seconds

of completing step 5.

Wait for a minimum of 5 seconds, and a

maximum of 50 seconds, then open the

freezer door, and view the status LED on

the infrared receiver module for the error

code. NOTE: You will have 60 seconds to

open the freezer door, and 2 seconds from

then to view the LED output code.

If the LED still flashes twice, there could be

dirt or frost on the optics, something could be

blocking the infrared beam path, or the optics

may be defective. Clean the optic elements and

repeat the previous test.

If the LED does not flash, the ice maker may

have been in a harvest, preventing the diag-

nostics from being performed. Look at the ice

maker to make sure the ejector is at the home

position. If it is, wait 3 minutes, and try running

test again. If the LED still does not flash, the

optics boards may be defective.

5-3