Whirlpool 4ED25DQ Інструкція з використання та догляду - Сторінка 20
Переглянути онлайн або завантажити pdf Інструкція з використання та догляду для Холодильник Whirlpool 4ED25DQ. Whirlpool 4ED25DQ 30 сторінок. No-frost refrigerator-freezer with thirst crusher
Також для Whirlpool 4ED25DQ: Інструкція з використання та догляду (24 сторінок)
Друкувати сторінку
Removing
the base
To remove the grille:
1. Open both doors.
2. Pull base grille forward to release the
support tabs from the metal clips.
3. Do not remove Tech Sheet fastened
behind the grille.
To replace the grille:
1. Line up grille support tabs with metal
clips.
2. Push firmly to snap into place.
3. Close the doors.
grille
Condenser coils
I
See cleaning instructions
for defrost pan and
condenser coils on page 24.
Changing
the light
bulbs
Electrical
Shock Hazard
Before removing a light bulb, either
unplug the refrigerator or disconnect
the electricity leading to it at the main
power supply.
Failure to do so could result in per-
sonal injury.
To change refrigerator
light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to
remove bulb.
3. Replace bulb with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change crisper
light:
1. Disconnect refrigerator from power supply.
2. Pull top of light shield forward until it snaps
free.
3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.
5. Replace bulb with a 40-watt appliance bulb.
6. Replace light shield in reverse order.
7. Reconnect refrigerator to power supply.
isper
light
20