Whirlpool 7S21FNI SL Посібник з експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Холодильник Whirlpool 7S21FNI SL. Whirlpool 7S21FNI SL 7 сторінок. How to install the handle door
Також для Whirlpool 7S21FNI SL: Посібник користувача (10 сторінок), Як встановити (4 сторінок)
Друкувати сторінку
not cooling
Temperature requirements for
both freezer and refrigerator
compartment are not being
reached
A very loud noise is heard
during operation
Door gasket does not stick to
the cabinet
The evaporator fan motor is causing
the loud noise.
The condenser fan motor is causing the
loud noise.
A loud noise is heard from the
compressor during operation.
A loud noise is heard from refrigerant
flow.
Other noise is heard from compressor
cabinet
contacts/connectors.
Make sure that the unit is plugged in to
the power outlet; check if the
evaporator fan.
Make sure that the air damper is able
to close and open properly.
Check for refrigerant leaks
Check for gasket leaks on both freezer
and refrigerator doors
Check if condenser fan is working
properly.
Remove the evaporator cover and the
freezer fan channel; check if the fan
blades rubbing with other components
or objects; if it is, make sure that the
fan assembly is in its right position and
if the fan blades are not worn out.
Check the fan motor is right position or
not.
If the motor in right position and a loud
noise is still heard during operation,
change it to a new one.
Check for worn out shock pad/gasket, if
it is, replace it with a new one.
If a loud noise is still heard, replace
compressor with a new one.
Need to take out all refrigerants and re-
inject it.
Check each pipe and make sure the
pipes do not rub with another.
Turn off the unit, use an electric hair
dryer to heat the gasket, in order to
soften it.
If the method above does not work,
change the gasket.
If the two methods above still failed,
remove the door and remove the lower
hinge shims to adjust the door box
spacing.