Whirlpool WSR25D2RYF00 Інструкція користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція користувача для Холодильник Whirlpool WSR25D2RYF00. Whirlpool WSR25D2RYF00 29 сторінок.
Друкувати сторінкуNOTE: Tighten t henutbyhand. Then tighten i twithawrench
twomore turns. Donotovertighten.
REFRIGERATOR U SE
A
B
C
D
E
F
G
A. Refrigerator water tubing
E. Ferrule (purchased)
B. Nut (provided)
F Nut (purchased)
C. Bulb
G. Household water line
D. Coupfing (purchased)
4. Turn shutoff valve ON.
5. Check for leaks. Tighten any nuts or connections (including
connections at the valve) that leak.
Style 3
1. Unplug refrigerator or disconnect power.
2. Remove and discard the cap from the gray water tube.
A
B
A. Cap
B. Inlet
3=
4.
5.
Using a compression nut and sleeve, attach the copper tube
to the water inlet.
Once secured, tighten the compression
nut. Do not
overtighten.
Check the connection by pulling on the copper tubing. Turn on
water supply to refrigerator. Check for leaks. Tighten any nuts
or connections that leak.
Complete the Installation
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these instructions can result in death,
fire, or electrical
shock.
1. Plug into a grounded 3 prong outlet.
2. Flush the water system. See "Prepare the Water System" or
"Water and Ice Dispensers."
NOTE: Allow 24 hours to produce the first batch of ice. Allow
3 days to completely fill ice container.
For your convenience, your refrigerator controls are preset at the
factory. When you first install your refrigerator, make sure that the
controls are still preset. The Refrigerator Control and the Freezer
Control should both be set to the "mid-settings."
Style 1: Rotary Controls
FREEZER
REFRIGERATOR
®
@
2
4
COLD l_s
COLDER
2__'.
COLD 1
s COLDER
__J
oQ
Style 2: Slide Controls
Freezer
Refrigerator
C
?
cold
1
2
_,
3
4
colder
off
1
2
A
3
4
colder
IM PC RTANT:
•
Your product will not cool when the REFRIGERATOR Control
is set to OFE
The Refrigerator Control adjusts the refrigerator compartment
temperature. The Freezer Control adjusts the freezer
compartment
temperature. Settings to the left of the
mid-setting
make the temperature less cold. Settings to the
right of the mid-setting make the temperature colder.
Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your
food may spoil.
NOTE: Adjusting the Refrigerator and Freezer Controls to a higher
(colder) than recommended
setting will not cool the
compartments
any faster.
Adjusting Controls
Give the refrigerator time to cool down completely before adding
food. It is best to wait 24 hours before you put food into the
refrigerator. The settings indicated in the previous section should
be correct for normal household refrigerator usage. The controls
are set correctly when milk or juice is as cold as you like and when
ice cream is firm.
Rotary Controls: Turn the control right (clockwise) to make the
compartment
colder. Turn the control left (counterclockwise)
to
make it less cold. To turn the cooling system off, turn the
Refrigerator Control counterclockwise
until it reaches the OFF
position.
Slide Controls:
Slide the control one setting to the right to make
the compartment colder. Slide the control one setting to the left to
make it less cold.
If you need to adjust temperatures
in the refrigerator or freezer,
use the settings listed in the chart below as a guide. Wait at least
24 hours between adjustments.