Whirlpool WTC 3746 Паспорт продукту

Переглянути онлайн або завантажити pdf Паспорт продукту для Холодильник Whirlpool WTC 3746. Whirlpool WTC 3746 4 сторінки.

Друкувати сторінку

A. Refrigerator Compartment

LED's lighting

Shelves / Shelf area

Multi-flow cold air system

Cooler compartment

Rating plate with commercial name

7a. Crisper divider

Egg tray

Reversibility kit

10. Separator

11. Door trays

B. Freezer Compartment

12. Area for freezing (with/without flap)

13. Area for storing frozen foods

14. Ice tray

15. Plastic shelf

16. Ice-cube tray

17. The freezer door trays for pizza or other frozen

products with a short storage time (2** storage

compartment)

Depending on the model the number and type of

accessories may vary.

C. Control panel and display

Anti-bacterial protection:

Filter in fan (depending on the model)

Crisper with antibacterial additives (depending

on the model)

18. Door seals

The crisper and the door seals are manufactured from

materials that inhibit bacterial growth.

Notes:

- All shelves and door trays are removable. Freezer plastic

shelf cannot be removed to have a good air flow rate

inside freezer compartment.

- The internal temperatures of the appliance depend on

the ambient temperature, frequency of opening the

doors, as well as location of the appliance. Temperature

setting must consider these factors.

- The appliance accessories are not suitable for washing in

dishwasher.

Downloaded from Fridge-Manual.com Manuals

PRODUCT SHEET

HOW TO START THE APPLIANCE

Fit the spacers (if supplied) on the

upper part of the condenser at the

rear of the appliance. When the

appliance is connected to the

power supply, the display lights up

and all the symbols appear on the

display for a few seconds.

The freezer factory setting -18°C appears and flashes,

while the refrigerator display shows a temperature of

+5°C (factory-set). While the appliance is working to

reach the factory-set temperature, an acoustic alarm

sounds and temperature symbol on the freezer display

flashes (- -). This indicates that the appliance has not yet

reached the optimal temperature for storage of foodstuffs.

Press and hold the button "Reset" until the acoustic alarm

disables.

The icon disappears when the freezer compartment

reaches a temperature below -12°C, the display will show

the temperature -18°C.

After being switched on, the refrigerator needs from 4 to

6 hours to reach the correct temperature to store a

typical volume of food in the refrigerator compartment.

Important:

•If food is placed in the refrigerator before the appliance

has cooled completely, it may deteriorate.

•Turning the refrigerator and freezer controls to a colder

than recommended setting will not cool the

compartments any faster.

•A built-in exterior moisture control continuously guards

against moisture build-up on the front edges.

Do not be alarmed if these edges sometimes feel warm to

the touch. The inside light switches on when the

refrigerator door is opened.

After 10 minutes of door opening the light switches off.

FAN WITH A BUTTON

The fan improves temperature distribution inside the

refrigerator compartment, allowing better preservation of

stored food. By default, the fan is ACTIVE.

It is advisable to keep the fan active, so that the "Fresh

Control" / "ProFresh" function can work and also when

the ambient air temperature is over 27 ÷ 28°C or if you

perceive drops of water on the glass shelves or in the

severe humidity conditions.

Note

Do not obstruct the air intake area with food items.

When Fresh Control / ProFresh is disabled

remember to turn off the fan when there is a lower

ambient air temperature.

To turn off the fan press the button (1a).

If the appliance has the fan it can be equipped with the

antibacterial filter.

Remove it from the box (found in the crisper drawer

(item 7) and insert into the cover of fan (item 1b).

The replacement procedure is attached with the filter.

FIN

RUS