Clam 8396 Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Намет Clam 8396. Clam 8396 10 сторінок.

TAKE-DOWN INSTRUCTIONS

1. Close all windows. Leave one or both doors open to allow

air to escape.

2. Remove all ropes and ice anchors and store them in the

provided pouch or in the carry bag side pocket. In windy

conditions, remove ice anchors after collapsing the roof and

walls.

3. Step on the skirt of the short (5 foot) side. Push the center

hub until the wall collapses inward (Photo 14). Continue either

clockwise or counter-clockwise pushing each wall inward until

all the walls are collapsed (Photo 15). The shelter will fall to

the ice on its own.

4. Push the hub of the roof down until it collapses (Photo

16).

NOTE: Make sure the roof collapses all the way. You may

have to pull up on the edge of the roof to get the roof hub to

collapse.

5. Unclip the shelter from the base on FLR models. Fold up

the shelter (Photo 17).

6. When folding the Expedition up for storage, inspect the hub

systems and poles for entanglement.

NOTE: The Expedition hub systems may tangle when

taking it down. It is extremely important to untangle the

hub systems and poles before completely folding the tent

up for storage (Photo 18).

7. Once the hub systems and poles are free and the tent is

completely folded, store in carry bag. Place the folded shelter

and the ice anchor/rope pouch into the carrying case with the

hubs toward the bottom end of the bag.

8. For Expedition FLR models, simply place the folded

shelter and the ice anchor/rope pouch inside of the base and

close the base (Photo 19).

Make sure your ice shelter is completely dried out after

each use and before storing. Store your ice shelter in a

cool, dry place. Keep away from rodents.

Tangled

Page 7

TAKE-DOWN INSTRUCTIONS

Untangled

Photo 18

Photo 14

Photo 15

Photo 16

Photo 17

Photo 19