Clam EDGE Посібник з експлуатації та деталей - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з експлуатації та деталей для Газонна та садова техніка Clam EDGE. Clam EDGE 8 сторінок. Power augers

Prolonged shutdown of your Edge auger
If you plan on storing your auger for more than a month, you should perform the following-
Completely drain the fuel tank until it's empty.
Start and run the auger with the fuel tank empty until the engine shuts off. This will ensure the carburetor has
been fully emptied and won't have any fouling due to residual fuel/oil mix. This will also help in starting the
auger the next time you run it.
Thoroughly clean the powerhead-including the air and fuel filter areas, as well as the air intake area.
Store safely in a dry, controlled area away from heat, flames, or even kids.
Note: If your Edge auger is stored with stabilized fuel, you should start it at least once a month to
ensure that it stays in good working order. Letting it sit too long between starts could cause fouling of
the carburetor that you warranty would not cover.
Limited Warranty
You Edge auger has a warranty that will cover the cost of replacing parts that are found to be defective from
the manufacturer. The initial purchaser has a 2 year warranty on the engine through Central Power
Distributors-including the emissions system, while Clam Corp. provides the initial purchaser with a one year
warranty on the transmission, auger and blades.
The following circumstances will result in the voiding of your warranty
Not performing any maintenance work on your auger
Adjusting components such as the carburetor away from the factory setup
Misuse and abuse of your auger
Damage from excessive dirt or buildup on your auger
Repairs made by a non-authorized repair center
Use of incorrect fuels or oils
Not following the operational instructions
Some parts are not covered by the warranty, and are considered normal wear and tear. Both filters-air and fuel,
the clutch, spark plugs, recoil, blades and rubber parts that handle gas are not covered by your warranty.
Warranty repairs should be performed only by a Clam authorized repair center.
For a list of Clam Edge authorized service centers, as well as registering your warranty, please visit
www.clamoutdoors.com.
For ordering parts for your Clam Edge engine, please see one of our warranty repair service centers or visit
Central Power Distributors online at www.cpdonline.com.
Thank you for purchasing a Clam Edge auger. For a list of other great Clam products, visit
www.clamoutdoors.com.
Good luck fishing!
7